Manual for the Protec Bytelan KVM/4
The switches are used when cascading more than a single BYTELAN KVM. It specifies the scan rate, and which KVM unit the keyboard and mouse are connected to. For a single KVM, use the default settings.
SW1 SW2 Scan Rate
----------------------
ON ON 2 seconds
OFF ON 10 seconds
ON OFF 20 seconds
OFF OFF 40 seconds
SW3 NOT USED
SW4 ON For KVM unit with KB/mouse
OFF For other KVM units w/o KB/mouse,
If your power supply isn't adequate, it may cause your KB/mouse problem. It should be 9VDC with at least 500ma.
Hope this helps.
×