How can I connect my panasonic pv-L354D to my computer?

Why make two (badly-spelt) attempts at the same query, when you could just look on Ebay ?

Use a FireWire cable with a USB adapter on one end that connects to the USB port on the computer..

Read more : http://www.ehow.com/facts_7149470_firewire-usb-transfer.html

This camcorder only has a firewire output, but not a USB output.

I am sitting here trying to do the exact same thing with my Panasonic PV-GS19. Only I am using Vista, but I am having the same problem.

The driver you will need to download to the PC then execute to make it work is at the link here ok.
Bye
David
Lowestoft
http://www2.panasonic.com/consumer-electronics/support/Cameras-Camcorders/Camcorders/MiniDV-Camcorders/Drivers-Downloads/model.PV-GS320.D#ts

You don't give enough details. More details would help.

I have a Panasonic IQ PV-IQ403 old palmcorder. I know how to connect it to a TV screen. I am not sure how a camcorder would connect to a computer. Maybe this information can be of help to you. I have separate flap door covering my RCA connections on my camera, located near the battery compartment. I just plug one end of the RCA cord into those connectors and the other end into the RCA connectors on my TV. I have to change the power switch on my camera over to the VCR position (take it off of the camera position). The TV has to be on channel 3 (or 4). I push play on my camera, and I can see what I have recorded on my TV screen.
This might work on your computer monitor. I am not an expert, but this information may be helpful.

Okay then let's start with that. Download the drivers from:

http://www2.panasonic.com/consumer-electronics/support/Cameras-Camcorders/Camcorders/MiniDV-Camcorders/Drivers-Downloads/model.PV-GS39.D#ts

Install the drivers and you should be good to go! Let me know if you're having any problems after that.

you need to installed a driver.... ...try this web www.driverguide.com

use the firewire (4 pin) connection instead

The usb is only used for the still pics and for the webcam. You need a DV cable to upload vid.