How to set time and data - Columbia All Sport Digi Watch l

To reset your Timex 637 T5G951 WR 30 heart monitor, you can follow these steps:

1. Press and hold the "Mode" button on the front of the watch for three seconds until the watch display shows "Settings."
2. Press the "Next" button on the side of the watch to scroll through the settings menu until you reach "Reset."
3. Press the "Mode" button to select "Reset." The display will show "Yes" and "No."
4. Use the "Next" button to scroll to "Yes," and then press the "Mode" button to confirm.
5. The watch will reset and return to the time display.

Note: Resetting your Timex 637 T5G951 WR 30 heart monitor will erase all your saved data and settings, so you will need to set it up again after the reset. If you need to keep your data, consider transferring it to another device before resetting the watch.

Hi,

The display of your watch may "freeze" due to static electricity or recent battery replacement.

If this occurs, press and hold all four buttons at the same time.

This will erase the data in the memory and allow you to reset the watch to the factory settings.

Press and hold all four side buttons at the same time to reset the watch to the factory settings.

Hope this helps.

If its a super fibre 3 series with 4 butons ( set, adj, mode, light)
Just keep the set button pressed for about 5 seconds, then use mode to select next( date, time, year etc) and adj to change the respective data. Then press Set once and its done.
Cheers

Follow this link: http://assets.timex.com/user_guides/W148_M851/W148_M851_NA_EN.pdf Follow instructions and your watch should work properly.

TIME/CALENDAR SETTING
1. In normal time display, press and hold A to enter setting mode; chime will begin
flashing.
2. Press C to increase setting value. Press D to decrease setting value.
3. Press B to set and advance to next setting value.
4. Setting sequence is chime, 12/24-hour time, hour, minute, second, year, month,
date, Auto EL.
5. Press A to save data and exit setting mode.

Hello I was in the same problem the last 5 hours causea icant find my owner manual, i put a new battery on my "oldie" but great watch and pusshin and seting i got it....

You have to put in "alarm mode", remember you have to push BOTON MODE. Then you will be at "stand by mode", "data bank(phone) mode", "world time mode", "alarm mode" "chrono mode", and set (analog watch) mode"

then you are in "alarm mode" then push "REV and FWD BOTONS" at the same time, one time, or two times or three times, until the "beep icon and bell icon" are in ON mode

Good look

sareg@hot....

http://world.casio.com/wat/download/en/manual/

Use the four numbers on the back of your watch and you will have a PDF version of your instruction manual.

Hope this tip helps

R/

David

Citizen Weather Data Clock Settings.
To set time press and hold for 5sec "set" button
Use advance to add days, years, hours seconds.
Press SET to hold.

Depress the recessed 'Adjust' button (top left side) which will get the time setting flashing. Then depress the button on the lower right side once to get to the 24 hour time option. You will then have manually enter the time in that format. Once set, then depress the rescessed 'Adjust' button again.