Question about Wolf Range 18 in. SPR-100 Gas Cooktop
There are a few things to check for. Make sure the electrode ( the small metal piece that the spark comes off from ) is clean and the holes in the burner are clean, use a pin or paper clip to clean out the burner holes and NOT a tooth pick as these can break off and make things worse. Example of a burner. The next thing to check for are the ignition switches under the surface control knobs, the switches can twist and break and keep the spark module on and the spark keeps "clicking" even when the burner is light. If every thing looks good, you may have a bad spark module, replace it. Sometimes cleaning can get moisture into the surface switches, try drying them with an hair dryer to see of this will help.
it sounds like it is the spark module that's making the clicking noise. normally there are 4-6 wires that connect to it , and if you are not comfortable making the repair yourself then I would call an appliance repair company.The part should cost 30-50 $ Good luck
hope this helps u
please rate me.......................
thank u for using fixya
Posted on Nov 25, 2009
Tips for a great answer:
Oct 20, 2013 | Jenn-Air 30 in. CCG2423 Gas Cooktop
Sep 11, 2011 | Maytag MGC5430BDS Gas Cooktop
Sep 25, 2009 | GE 30 in. Profile JGP933 Gas Cooktop
Sep 04, 2009 | Bosch 30 in. NGP 732 / 736 Gas Cooktop
Jul 22, 2009 | GE Profile JGP636 Gas Cooktop
Oct 28, 2008 | GE 30 in. JGP336 Gas Cooktop
May 06, 2007 | Miele 36 in. KM342 Gas Cooktop
Jan 02, 2014 | Wolf Range 18 in. SPR-100 Gas Cooktop
1,192 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: