I have a Philips Magnavox 51MP392H Rear Projection Television. The model #8P5434 C101 the serial # 13091835. While moving my television the screen for the front of the television flew out the back of my truck. I need to find the replacement plastic screen for the front.

power module

This is a common problem. Its called a convergence failure.

Problem #1) Convergence

Symptoms:

• Screen Looks 3D
• Colors wont align
• Video may look distorted

Problem #2 CRT Fluid has clouded over. Symtoms

• Dull looking video
• White looking video
• Halos around objects
• Red/Orange looking video

You can see some examples and find a fix here...

http://www.fixya.com/support/r2861467-solution_video_looking_whiteish_dull

mine is doing the same thing and it is the same tv same year

Go to convergence in the menu. If you colors will not move you need convergence amps. Have professional install

You can find a replacement Philips/Magnavox fresnel screen, in stock, for this model (51MP392H/17) at this following link from a major parts distributor:

Philips / Magnavox 51MP392H Replacement Part Fresnel Screen

And here's a link for the Lenticular (middle) Screen, if needed:

Philips / Magnavox 51MP392H Replacement Part Lenticular Screen

The screen is available from tritronicsinc.com for $239.44 using part number: 483536037078

Dan

are you getting sound, was it moved laterly, did you just get it from somone, did it get wet, does it make clicking noises, was the picture color/ convergence blurring before this, were the colors slowly seperating such as red/blue/green?, did the picture bow on top and bottom or sides prior to tihs, was there anything note worthy prior to the blank screen.

generally its IC convergence problem with the larger philips projection TV's however I need more info on your TV, also size make model # anything you can provide gets us a more narrowed solution.

hope this helps....

If the red converge will not line up, then there the convergence chips are actually bad - the repair will cost around $700 if you go through a Magnavox authorized service center. I would look at posts by Slinteriors in the Philips or Magnavox rear projection sections - he has some ideas on generic chips that might be had for cheaper.

part warehouse out of dallas 1 800 321 6993 give model No. they have a research dept. 48Hr call back

If decide to do yourself, ya only have to do the green and blue ones, the red light spectrum won't allow fungal growth. Pull whole CRT assembly out to prevent spilled/leaking glycol from onto lower main boards