Question about Samsung Digimax S630 Digital Camera

1 Answer

Color is off...shows blue

How do I reset the camera for normal color?

Posted by on

  • jocoop Jan 12, 2008

    How do I reset the camera for normal color. I am showing a blue cast to all recent photos. thanks in advance

    jocoop

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Contributor
  • 39 Answers

If you're having an issue with the color of the pictures, you could the steps below:

Do the POWER RESET.
- Turn off camera
- Remove batteries for a minute
- Reload batteries
- Turn on camera

Do MASTER RESET.
- Be in AUTO mode
- Press on MENU button
- Press on the right button until you see SETUP 2
- Scroll down until you see RESET
- Press the right button to pick up on YES or NO
- Press on OK/MENU button for changes to be saved

Turn off camera after the settings
have been changed to refresh the camera.

Hope this one works.


Posted on Jan 12, 2008

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Panasonic lumix dmc-zs3 display colors not showing


We recommend you enter the camera's menu and try using the reset procedure, in the setup menu, available here: http://service.us.panasonic.com/OPERMANPDF/DMCZS1.PDF#page=24

Mar 25, 2014 | Panasonic Lumix DMC-ZS3 Digital Camera

2 Answers

My video works and i here people talking but they cant here me.


Vista mic set up

BODY,.aolmailheader {font-size:10pt; color:black; font-family:Arial;} a.aolmailheader:link {color:blue; text-decoration:underline; font-weight:normal;} a.aolmailheader:visited {color:magenta; text-decoration:underline; font-weight:normal;} a.aolmailheader:active {color:blue; text-decoration:underline; font-weight:normal;} a.aolmailheader:hover {color:blue; text-decoration:underline; font-weight:normal;} BODY,.aolmailheader {font-size:10pt; color:black; font-family:Arial;} a.aolmailheader:link {color:blue; text-decoration:underline; font-weight:normal;} a.aolmailheader:visited {color:magenta; text-decoration:underline; font-weight:normal;} a.aolmailheader:active {color:blue; text-decoration:underline; font-weight:normal;} a.aolmailheader:hover {color:blue; text-decoration:underline; font-weight:normal;} TEST SPEAKERS

Right click on speaker icon in System Tray Select "Playback Devices" The speaker icon ( checked as working) and volume level graph should be visible Right click on the volume graph and click "Test" Left hand speakers followed by right hand should be heard

SET DEFAULT & TEST MIC

Click "Recording" tab. Set required mic as default - click on mic font to highlight and click "Properties" In lower dropbox display "Use this device enable" click OK Click "Levels" tab and set slider to 80% ( adjust to suit later) Return to "Recording". Test mic by speaking and make sure volume graph displays

Aug 25, 2009 | Logitech QuickCam Communicate Personal Web...

1 Answer

Canon SD1100IS Power Shot camera has a blue color to the screen.


are these pics are also purplish or blue tinge when u see them on pc if yes then my friend

CCD FAILURE !

dont worry u are eleigible for free repairs it is a manufac fault just see the link and call canon in ur area they will repair it free of charge dont worry if u are out of warranty or ur model is not mentioned on the list just call them everything will be ok PLS RATE ME FIXYA for help

http://www.usa.canon.com/consumer/controller?act=PgComSmModDisplayAct&fcategoryid=221&modelid=8288&keycode=2112&id=29819

Mar 28, 2009 | Canon PowerShot S2 IS Digital Camera

1 Answer

Digimax 240


Check the color/light settings on your camera, and reset it to auto to get it back to normal. Changing this setting to tungsten or fluorescent forces your color to shift, but is clearly not what you want at this point.

Jun 05, 2008 | Cameras

1 Answer

Hitachi inspire projection tv


use the advanced options page and reset the factor blue and red convergence defaults then do re apply the auto color defaults color at first it seemed very red (which is good because red was the missing factor in the green picture) but after reseting all the color and tints to the normal ranges I then reset the color auto correct again and all seems fine.

Dec 02, 2007 | Televison & Video

1 Answer

Pictue is dark as hell


use the advanced options page and reset the factor blue and red convergence defaults then do re apply the auto color defaults color at first it seemed very red (which is good because red was the missing factor in the green picture) but after reseting all the color and tints to the normal ranges I then reset the color auto correct again and all seems fine.

Oct 27, 2007 | Hitachi 65F59 65" HDTV

1 Answer

Hitachi 50UX57B 50 inch Rear Projection smearing...


try this

use the advanced options page and reset the factor blue and red convergence defaults then do re apply the auto color defaults color at first it seemed very red (which is good because red was the missing factor in the green picture) but after reseting all the color and tints to the normal ranges I then reset the color auto correct again and all seems fine.

Sep 18, 2007 | Hitachi 50UX57B 50" Rear Projection...

1 Answer

Can't get normal color in video mode.


We just solved this problem! Rotate the wheel button (above the Display & Menu buttons) to see the various option (Color Accent, Color Swap, Compact, etc.) and stop when you get to Standard.

Sep 12, 2007 | Canon PowerShot A540 Digital Camera

1 Answer

Saturation of unrealistic color


It is definite CCD chip problem. If you are within warranty period, send it back quick. They probably replace with other unit because the parts are not available for the product. Good luck.

Mar 13, 2007 | Apex Digital 4330z Digital Camera

Not finding what you are looking for?
Samsung Digimax S630 Digital Camera Logo

Related Topics:

136 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Cameras Experts

Cindy Wells

Level 3 Expert

6046 Answers

FIKRET UNALIR
FIKRET UNALIR

Level 1 Expert

239 Answers

Anthony Ward
Anthony Ward

Level 2 Expert

397 Answers

Are you a Samsung Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...