Question about Safe International Digital Electronic Safe Lockbox Gun Jewelry Lock Box Tool

2 Answers

Change code Hi, have a CE safe with 2 keys, 'electronic digital safe', there is a small sticker with 1820565, right underneath the key hole, but nothing else. I need to change the code, but do not know how, please help, thank you

Posted by ingrid_vande on

Ad

2 Answers

Anonymous

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    New Friend:

    An expert that has 1 follower.

    Corporal:

    An expert that has over 10 points.

  • Contributor
  • 1 Answer

Try this
Open the safe.
press the red button on inside of door
entry the new code you want followed by B
Should be good

Posted on Nov 28, 2009

Ad

Anonymous

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I have a Safewell System Electronic Safe - Model EX2005283119.
The lock is not working properly and does not lock.
I have lost the instructions of the safe.

Posted on Jan 24, 2010

  • 3 more comments 
  •  Manoj Singh
    Manoj Singh Mar 16, 2013

    Just say what display tells you. Does it say E-Bar or E-Code.

  • Dave Apr 09, 2013

    hi Manojkuma240, I have a safewell also, Model number starts with TJ and we have the key and code for it but the manual is nowhere to be found. Any idea on changing the code? Any assistance would be appreciated. Have contacted Safewell in China as well but no response as yet.

  •  Manoj Singh
    Manoj Singh Aug 14, 2014

    Just Open the safe. Look for a red color button on the back side of the safe. Press the button, enter the new code. It will give you a beep sound. New code is set

  •  Manoj Singh
    Manoj Singh Aug 14, 2014

    Red button is behind the main door near the hinges

  • Chanyanit
    Chanyanit Mar 29, 2016

    It's not work.

×

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My ce safe has flat battery. how do we open it, please advise Graham


i have a CE electronic safe,batteries went,so i heated the lock with the hair dryer,it worked for me

Jun 12, 2011 | Safe International Digital Electronic Safe...

1 Answer

I have a ce electronic system safe for which I have two keys. I dont remember how to use the combination battery operated code any more as I have lost the instructions. Can I download these instructions...


I have a ce electronic system safe for which I have two keys. I dont remember how to use the combination battery operated code any more as I have lost the instructions. Can I download these instructions from the internet anywhere? The keys have 128 written on them but I cannot find any further I.D numbers anywhere. Thankyou very much for your assistance

May 21, 2011 | Safe International Digital Electronic Safe...

3 Answers

The batteries of my powersafe TR 36 are dead and I don't have any key. What can I do to open the safe? Urgent! Thank you in advance!


I know this post is months old, maybe you didn't open your safe yet or maybe someone else could use the advice.

The batteries are no inside the safe because of this reason, that you should be able to change them if they run dry.

Under the key panel is a long plastic panel. You can slide it to the right and underneath you find the battery compartment.

4 x AA batteries

Dec 30, 2010 | Safe International Digital Electronic Safe...

1 Answer

Can not open safe no key dead batterys


You should be able to change the battery from outside the safe by removing to keypad but no key means you have to drill out the lock start with a small titanium drill bit like a 3/16 and step up the hole size until you have the entire core drilled out then you will have to drill a hole throw the metal case(1/2"drill bit) above and below the key hole to get to the pins then drill a hole in the pins with a small drill bit just enough to put a notch in them so you can pry up on the bottom and down on the top with 2 screw drivers at the same time to release the pins ( not easy to get into a safe ) but it can be done I had to get in to one and this is how I did it, it took about 2 hours to get in it . And the safe was ruined in the process you could call a locksmith that could cut a key for it don't know how much it would cost? They just slip a blank key in the key hole and notch out where the tumblers leave marks on the blank it takes a while and a few blanks. But it can be done if you know what to look for on the blanks.

Hope this helps and good luck........

Dec 08, 2010 | Safe International Digital Electronic Safe...

3 Answers

Noble CE Safe Electronic


It´s very easy, you have look for a red button behind the door, press it for 3 seconds and the press the code you want and then press A. Hope you fix it.

May 28, 2009 | Safe International Digital Electronic Safe...

1 Answer

I have a pilot hotel safe model sae-1410 batteries are dead. it looks like an adapter plug for external power is that correct?


Yes, that's right. You can use an external battery box with a mini-jack connector to give power to the keypad. If you have it, just plug it in, type in your code as usual and turn the key. Should be fine. Otherwise, use your emergency key (the round one), which overrides the keypad. You need to flip off the cover around the main keyhole and underneath is the emergency key hole. Turn that first, then the main key...hey presto!

Apr 24, 2009 | Safe International Digital Electronic Safe...

Not finding what you are looking for?
Safe International Digital Electronic Safe Lockbox Gun Jewelry Lock Box Tool Logo

4,980 people viewed this question

Ask a Question

Usually answered in minutes!

Top Safe International Locks & Locksmithing Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

john h

Level 3 Expert

23504 Answers

Sheldon Dedek

Level 3 Expert

912 Answers

Are you a Safe International Lock and Locksmithing Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...