When switched on colours fine after short period colours seperate causing a 3d type effect

use the hdmi from player to tv, use seperate coax or optical cable from player to reciever for your sound

Check to see if your cable is ok and replace with another to prove first as if one of the pins is broken then this may cause a colour issue.

I would try a genuine hp cartridge just to check. it sounds as though there is no air in the cartridge giving the effect of sucking on an almost empty bottle of water. Usually attributed to lousy compatable cartridges.. i bet with a genuine one in there all will be well.

Try Using the HP Print Diagnostic Utility in Windows - HP Customer Care (United States - English)

sir/mam the problem of your t.v is weak picture tube,i have encountered for that kind of problem already.

Try using a different video cable. There could be a short in it. If the cord is longer than 30 ft, it may be losing the signal due to the length.

[u][b]LCD Monitor Shadow Effect[/b][/u]
This problem is best described as the LCD monitor "Shadow Effect".
The solution to this very simple. No software or hard ware changes required.
The cables that are connected to the LCD monitors are causing the problem. Its also called as electromagnetic noise or electrical noise.
[u][b]Solution: [/b][/u]Keep the two cables - (power cable and moitor display cable), that are connected to the LCD monitor as far away as possible with each other and also away from other electrical cables.
Thats it. Your shadow effect is fixed.
Thank you.

you will need to change out the convergence board if the blue and green wont align its time for a new board