Hoover Vacuum not working - Dust Manager Cyclonic 1800W

It seems it must be blowing out from somewhere. Try to figure out where by feeling for air blowing to try to determine where it's coming from and why.

Are the brushes worn down too far? As they wear the springs tension gets weaker. The brushes can also get stuck inside the channel they slide in. Could also be a buildup of dust etc inside and around the internal fan or commutator, etc.

Hi there! We recommend taking your cleaner in to a Hoover authorized service center to have the motor replaced or repaired. I have included a link to the service center locator if needed. Hope this helps!

Service Center Locator

Replace the filters and then check for clogs if problem persists

The Hoover Fusion Plus Cyclonic Upright Vacuum has a 1 year manufacturers warranty from date of purchase. You need to check your reciept to see if it's under a year old. Then go to the Hoover.com web site to find the closest Hoover warranty service center to where you live. Bring the proof of purchase and the vacuum to them.

With this model, remove the dust tank, and turn it on, check for suction at the lower intake. If you have suction, install the tank and remove hose, and check for suction there. keep following until youn lose it. Then you problem will be between those 2 areas

I’m happy to assist further over the phone at https://www.6ya.com/expert/robert_b96ba3f038cf317c

its not the v-belt its the idler pully, ours did the same thing, need to get it warrentied

REQUIRE REPLACEMENT OF DUST BAG BRAND BLACK AND DECKER MODEL VB 1800 XE HEPA 13.PLEASE SOLV THIS PROBLEM OR COMPATIBLE DUST BAG

Not sure what model of Hoover you have, you may need a new handle release.

take it back for a refund and buy another make I have had one also my daughter they are hopeless, they work for 7 minutes then cut out. Not fit for purpose, Electrolux are not interested in solving their problems