Need software and manual

The manual is available from the Pentax support site. The direct link to the PDF is: http://www.pentaximaging.com/files/manual/IQZoomEZY-R.pdf . If the link doesn't work, start at http://www.pentaximaging.com/ and click on Support > Downloads and Literature. Then select your model through the menus (Cameras > Film Point and Shoot IQZoom EZY-R. Then check the box for manuals and the Submit button below and to the right of the list of all possible downloads available.

I hope this helps.

Cindy Wells
(you can also buy a copy of the manual for $8 by clicking the purchase link from the above search.)

You can download software from
http://esupport.sony.com/US/perl/swu-list.pl?mdl=DSCP52

You might want to consider NOT connecting the camera to the computer.

The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.

Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive. Or you can use any photo cataloging program.

Use this software ArcSoft® PhotoImpression torrent download HERE

Hope it helps.

Nikon offers its software for download at their <a href="http://support.nikontech.com/app/answers/detail/a_id/61">official site</a>. Some of it is free - like the "Nikon Transfer" program you're looking for. Many of the others programs are the "try before you buy" type that allows you experiment for 30 - 60 days to see if it's a good fit for you first.

You could also purchase a simple card reader that connects to your computer via USB port. This way, you would simply remove the memory card from the camera and insert it into the reader. You computer would see the card as an additional drive. No camera or battery power required. Many times that card reader will read (and write) much faster than if done in the camera.

I hope this was very helpful - and good luck!

Just buy a card reader and use it instead of your camera and software.

www.myacrobatpdf.com/.../sanyo-software-pack-75-for-digital-movie-camera-instruction-manual.html

search.wareseeker.com/sanyo-xacti/

Hi hamid2fresh,
This is the radio shack web address for drivers. I think your driver is near the bottom of this list:- Gigaware Vga Pc Camera, but please check the list. The first of those is Win Xp, the one below is Vista. You should create a restore point before installing the driver, then if it is not correct you can try one of the other drivers.
Hope this helps.
Mark.



http://www.radioshack.com/uc/index.jsp?page=software&help=yes

Either go to the Panasonic website and download a free copy of the software, or buy a cheap USB SD Card Reader for 5-10 dollars and skip using the USB cord.

Hi

U can download the software from the company website itself..

thank you

I think you may be able to use 3rd party software like "ConvertXtoDVD" the camera records in type of .mpg format & this can be used by many programs including Media Player as long as ya have the right "CODEC" to play and manipulate them. So identify the CODEC, what type of .mpg etc, the camera records in and get , Down Load, that one for Media Player. You may be able to use Windows Movie maker too, but any of the good movie programs would do. I have enclosed some helpful links to further help.. www.shareup.com/ConvertXtoDVD-download-44697.html www.windowsmoviemakers.net/Tutorials/HowToMakeDVD.aspx ats3.fandm.edu/parts/quickstarts/mp026.pdf