I just bought a Bernette Deco 340 and I am having a terrible time loading from the interbet design that will go on the USB stick and be accepted on my sewwing machine....I have call the sewing center, asked friends and they all say something different, some say load in pes. some exp some art..which one do I download and how do I get them on my USB stick and how do I get my sewing machine to acccept the design...please help me Sue Mohan [email protected]

Take it in for service. There is no reset procedure.

https://www.bernina.com/de/SupportData/bernette/deco-340/deco_340_EN_04-13.pdf

..

Service manuals are difficult, if not impossible, to find as they are intended only for technicians. You may be able to find one for sale somewhere, ie eBay or some other web site, but the likelihood is low.

...

Punctuation in embroidery is sometimes tricky. Perhaps using downloaded software will give you other options.

Bernette 340 downloading internet files

https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=10&ved=0ahUKEwjV3MKYgJvMAhXpvYMKHQ7KCAEQFghHMAk&url=http%3A%2F%2Fsneedswv.com%2Fworkbooks%2FMyBERNINA-1-Embroidery-Workbook-111513.pdf&usg=AFQjCNEE8r8hvaAyOXc_iHEowULaAYe5nQ&cad=rja

Bernette 340 deco Fonts Bernina

Bernette 340 Deco Embroidery Machine

Is it 32mb or 32gb??? If it is gb, it is probably way too much for your machine. If it is mb, then you should not be having a problem. Of course, the more you put on it, the longer it will take to load.

sewing patternreview com

Manual:
https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&cad=rja&uact=8&ved=0ahUKEwjvnPGR-f3KAhVGnIMKHTPyBKEQFggdMAA&url=http%3A%2F%2Fwww.bernina.com%2Fde%2FSupportData%2FBERNINA-Nah-und-Stickmaschinen%2Fbernette-Deco%2FManuals%2Fdeco340_EN_GZD&usg=AFQjCNE-yv_x3wZnX4ht12ipaSvUcwp7qg

Embroidery Forum:
http://freeembroiderystuff.embroiderydesigns.com/forums/threadView.aspx?id=109

...

at the bottom of page click on downloads http://www.mybernette.com/en-US/Deco/Bernette-340-Deco.html

According to the manual for the Bernette Deco 340, the machine only reads .EXP+ files. ART files need to be converted to the EXP file type using the Bernina Embroider Software. (Even the designs on the Studio Bernina CD need the ART files converted to EXP.)

The manual is available from the Bernina support site: http://www.bernina.com/en-US/Support-5/Machines-en/bernette-deco-en . The direct link to the manual is http://www.bernina.com/getdoc/c6cc51e0-d5e9-4cb1-a7be-f164c0f4fdff/deco340_EN_GZD . (Note: you will need Adobe Reader or a similar program to access the manual.)

I'm surprised that you were able to get any .art files to work until recently.

I hope this helps.

Cindy Wells

Not sure if you found anything out, but Deco 600 uses PES format only.
If you have the software (Deco Wizard) sometimes you can change it to PES and save the design.
Good luck

you can download your pattern on your computer and use your magic box to open it with and place it on the card...i have a Deco 600 also. it is a lot of work to write the design on the card each time but it does work..I have a magic box and card..i am not familiar with the wizard box...

If your deco wizard is the same as the pe-design 2,3,4 you can transfer your designs to the computer in the file utility, then you can save them to usb and transfer to your Vista computer.

I haven't got the 600 buyt I do have a Bernette Deco and when I save designs on my USB stick I have to ensure they are saved to a particular folder in the stick. Perhaps there is a similar type of requirement?