Having trouble finding the correct comcast remote code for my samsung dvd/vhs player i have tried all that they list and stll nothing

I was having the same problem with my 40" Proscan Tv. I had to go to Comcast and get the remote with the gray OK button instead of the red. I could program my DVD player with a 4 digit code so this remote worked when I put in the 4 digit code Proscan sent with the TV (0178). This was the only solution I could find . They do have the remotes with the gray button but you might have to be very persistant to get one with the codes for the rest of your electronics.

I just programmed my comcast remote for my Samsung v1000, My comcast remote is very similar to the 3-in-1, but has a few more buttons on it (on the Comcast site, my remote looks like the DVR 3 remote, but I don't have a DVR). The code I used was 21044.

By using this code, the play/stop/rewind/ff buttons all work. I didn't test the record button. The Info button worked as "Display" and Exit button to work as Audio Source (HiFi/Mono). However, the Volume and Channel controls did not work.

I hope this helps.

Try 0573, 0820, 1932, 0240, or 0045. I also have comcast but just use the remote that came with the recorder/player.You can control all the player functions as well as the up/down volume.

here is a link to the codes you will need;
http://www.comcast.com/MediaLibrary/1/2/CM/VanityURL/documents/comcast_on_demand_remote_manual.pdf

hope this works for you
please give good rating
thanks

tom

try one of these 0147 0997

try this...

I got the RCR612 remote to work with my DRC200N by using Memorex code 3318, see if that works, also try 3391 and 3314, I read a lot of people got those to work.

If using the comcast remote to control your dvd player, then review comcast manual for the codes for dvd. If the manufacture isn't listed or the codes don't work, then there might be a range of codes in the manual you can try.
Otherwise you can contact your dvd manufacture on purchasing a new one or get a learning remote.

try code 10030 (comcast remote), or codes for daewoo.

Since the codes that Comcast gave you did not work, there is a very high possibility that the remote control is not compatible with the DVD player. You cannot expect universal remote control to work with all devices, regardless of its make. Philips does not have codes for this DVD player because it is the maker of the universal remote control that sets the codes.

I had the same problem trying to use those three codes with a Samsung DVD-R155 recorder and then downloaded the pdf files for all of Comcast's remotes and came up with two codes (1) 20490 and (2) 21470. The second code worked for me. Hope that this will work for someone else.