Question about Cabela's Oregon Scientific Indoor/Outdoor Thermometer with Alarm Clock

1 Answer

Can't get my indoor/outdoor thermometer to work

I have a Taylor rf wireless indoor/outdoor thermometer that has died and I have installed new batteries in both units and it still won't turn back on. I've lost my instructions and can't figure it out. It has a 2305 sticker on the bottom of both units. And it says 433MHz Wireless on the front of the indoor unit. It stands upright about 8 inches tall. Help! Jodi

Posted by jlbrown86 on

Ad

1 Answer

fjay

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

Taylor manual 2334 (listed on a sticker) is really a 1434 (found at the back) next to FC
see Taylor 1434 Wireless Weather Station Instructions eHow
or download the manual here: http://www.manualsonline.com/mdownloads/e21bacd8-65d3-0b94-11a4-6da012820693.pdf

Posted on Sep 04, 2014

Ad

1 Related Answer

fixya-surfer

Sys Admin

  • 73 Answers

SOURCE: Acu-Rite indoor outdoor thermometer won't stop periodic beeping

There is no way to turn off beeping. From this site: http://www.chaneyinstruments.com/FAQ.aspx
found solution - search for - Q: My wireless weather station periodically beeps, why?
A: .. unit's ability to detect a foreign radio frequency of another wireless unit when that unit transmits a signal. .. any wireless devices transmitting on a radio frequency have the potential to interfere with each other. Limit the amount of wireless devices to lesson the chance of interference. When beeping occurs, one device will need to be deactivated.

There is no way to turn off beeping, d/s designers forgot. I had the same problem, another external temp gauge showed up on the other channel, so my neighbor or someone is using the similar unit. MY SOLUTION: opened back of case and cut black wire to piezo speaker (at base if rear cover opposite side of stand-up prop) that creates beep. Don't use any sound features, ALL good now.

Posted on Mar 02, 2011

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a model 9125itc thermometer. The outdoor temperature is not showing on neither indoor or outdoor instruments. all I am getting are - - bars. I have installed new batteries


  • Remove all batteries
  • Install batteries in outdoor unit and allow time for it to begin transmitting temperature data
  • Install batteries in indoor unit. You should see outdoor temperature displayed. If not, the outdoor unit may be defective

Dec 23, 2017 | Measuring Tools & Sensors

1 Answer

Remote not working


Alkaline batteries will not work below freezing in the outside temperature sensor. Buy Lithium batteries for the outside sensor unit alkaline are okay for the inside unit.

Dec 18, 2015 | Taylor Wireless Digital Thermometer with 1...

1 Answer

Springfield precise temp in out thermometer 91756


Return it to the manufacturer for warranty repair/replacement

Jul 23, 2014 | Taylor 91756 Wireless Thermometer With...

1 Answer

Installed new batteries, but need instruction to reset temperature readings


Type "Taylor 1524 manual pdf" in google. That should pull up your manual. Sometimes companies produce the same item, with just subtle changes (product differentiation) i.e. Chevy used the same motor block for the 327,350,400 chevy motors, and just installed different cylinder heads.

Apr 22, 2014 | Taylor 1524 Wireless Indooroutdoor...

1 Answer

Lost my instructions. I replaced the batteries and I can't get it to sinc up.


go to http://www.taylorusa.com/digital-indoor-outdoor-thermometer-1.html and select the link for the manual (Instruction Book under support info, bottom right)

Jan 29, 2011 | Taylor 1522 Indoor Outdoor Thermometer

1 Answer

My oregon scientific indoor outdoor weather station with atomic clock just stopped picking up the outdoor readings, it won't switch to that channel any longer. tried removing and reinstalling the battery,...


I had the same problem, Since the outside temp wouldn't read, I figured it was the outside unit batteries. Went through half a dozen AAA batteries and wouldn't read. It was the indoor unit. Had the same bats I installed 3 years ago. DUH! Replaced the AAA, and all was well. When the inside batteries die out, it has just enough juice to read indoor temp, but not enought to sense exterior signal.

Oct 20, 2010 | Oregon Scientific Wireless IndoorOutdoor...

1 Answer

Outside temperature not showing on ll bean model # 9021u-it


Try removing the batteries from both the outdoor sensor and the indoor unit. I had the same problem and fixed it by doing this.

Sep 28, 2010 | Taylor 1528 Wireless Digital Indoor...

1 Answer

I have a equitytime thermometer and can't find the instructions for it. I just changed the batteries and can't get the outdoor to send a signal to the indoor unit. where can I find the instructions for a...


Take the batteries out of both units (the base and the outdoor thermometer). Put the batteries back into the outdoor unit, and then put the batteries back into the base unit. This worked for me.

Apr 07, 2010 | Kitchen Appliances - Others

7 Answers

GE Digital Wireless Thermometer


Wireless Digital Thermometer GE5805WS4
Instruction Manual

Buttons and Functions
Button Function
Front of unit:
Min/Max...........displays Min or Max temps recorded
CH(Channel)......changes displayed channel
(hold 3 sec to erase)
Clear................clears memory in Min/max display
Back of unit:
C/F....................Toggle between Celsius
or Fahrenheit temperature display
Scroll.................Remote Channel Scrolling ON/OFF

INSTALLING BATTERIES
IMPORTANT:Read the section SETTING UP THE THERMOMETER before installing the batteries for the first time.

1.Remove the rear cover of thermometer. Install 2 new AA batteries. Replace battery cover.
2.Loosen 4 screws on rear battery cover of the Remote Sensor and slide battery cover off.
3.Install 2 new AA batteries .
4.After batteries are installed, the remote sensor will begin transmitting and automatically register to the Thermometer
(within range) after several minutes. However, you can also press the small button in the battery compartment (labeled Tx) to register the Remote Sensor to the Thermometer immediately
5.Replace battery cover and tighten 4 battery screws. Make ure that the battery cover is fully on and tightened to assure a watertight seal.

SETTING UP THE THERMOMETER
The thermometer can monitor up to two different Remote Sensors on two separate channels. Add-on remote sensors can be purchased separately and are compatible with the GE Wireless Thermometer/Clock (model GE5805WS4) as well as this unit. When first installing, always insert batteries into the Thermometer first, then into the Remote Sensor.
The thermometer uses random security code technology-it will learn the random code of the first Remote Sensor it detects and log in as channel 1. Channel 2 will register in the same way. NOTE: Registered channels will be erased when the batteries of the Thermometer or Remote Sensor are removed. When replacing batteries for a Remote Sensor, remember to clear the corresponding channel of the Thermometer in this way:

1.Remove batteries from the remote sensor (step 2 of installing batterie)
2.Select the channel that you would like to clear by pressing the CH button on the Thermometer until this channel number is displayed.
3.Hold the CH button for 3 seconds to clear the channel
4.Follow steps 3-5

MOUNTING THE REMOTE SENSOR AND THERMOMETER
Remote Sensor is suitable for outdoor mounting (watertight) at a range up to 100 feet from the Thermometer. HOWEVER, HE UNIT SHOULD NOT BE MOUNTED IN A POSITiON WHERE IT WILL BE SUBMERSED IN WATER, OR EXPOSED TO DIRECT SUNLIGHT, OR NEAR OTHER SOURCES OF HEAT OR COLD (I won't bother typing the rest) except for:

LOW Battery icon for the sensor will show up on either the
ch 1 or ch 2 display depending on which sensor is losing battery power.

Battery life 6 months
Temp Range Therm 32 to 122 deg F
Remote Sensor -58 to 158 deg F *
*Alkaline batteries can freeze temporarily at temps below -4 deg F. In this condition, the Remote Sensor cannot accurately transmit temp info to the Thermometer. This limits the effective minimum temp fo the Remote Sensor to -4 deg F

Operational Range....>50ft(and up to 100ft)(less interferances)

RF Channel ....refresh to "---" if no signal received in 60 minutes

Jan 06, 2008 | Heating & Cooling

Not finding what you are looking for?
Audio Players & Recorders Logo

1,912 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cabela's Audio Players & Recorders Experts

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

 Grubhead
Grubhead

Level 3 Expert

5700 Answers

The Knight
The Knight

Level 3 Expert

76416 Answers

Are you a Cabela's Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...