If your laptop comes with recovery media then you can use it to restore it to factory, but if you lap does not have any recovery media then you have to create it there should be a program installed in your laptop that allows you to create your recovery media (RECOVERY MEDIA CREATOR) or somthing like that, you will need blank dvd's for this process once you have burn all your dvd then you will have to boot from dvd recovery dvd 1and continue till you have complete all process.
But if you do not have recovery media dvd and cannot create recovery media dvd then you will need any preffered windows operating system to formatt your laptop .
Driver for your laptop can be obtain from this site
http://www.acer.com.au/acer/service.do?LanguageISOCtxParam=en&miu10einu24.current.attN2B2F2EEF=3112&sp=page15e&ctx2.c2att1=92&miu10ekcond13.attN2B2F2EEF=3112&CountryISOCtxParam=AU&ctx1.att21k=1&CRC=3559666452
Resetting the Printer to Factory Default
Settings
Resetting the printer to factory default settings can be useful when
you are troubleshooting with the printer.
CAUTION Resetting factory defaults clears the page buffer, removes downloaded
fonts and macros, and returns all print menu settings to factory defaults.
To reset the printer to factory default settings
1 Press MENU until RESETS MENU displays.
2 Press ITEM until RESTORE FACTORY SETTINGS displays.
3 Press SELECT until the following message appears:
RESTORING
FACTORY SETTINGS
This message displays until the printer has completed the
initialization
Resetting the Printer to Factory Default
Settings
Resetting the printer to factory default settings can be useful when
you are troubleshooting with the printer.
CAUTION Resetting factory defaults clears the page buffer, removes downloaded
fonts and macros, and returns all print menu settings to factory defaults.
To reset the printer to factory default settings
1 Press MENU until RESETS MENU displays.
2 Press ITEM until RESTORE FACTORY SETTINGS displays.
3 Press SELECT until the following message appears:
RESTORING
FACTORY SETTINGS
This message displays until the printer has completed the
initialization
129 views
Usually answered in minutes!
×