Question about Viper Security and Remote Start System (basic install included)

4 Answers

Viper 5101 installation guide not the owners manual if anyone can help please

Posted by baseballman7 on

Ad

4 Answers

Anonymous

  • Level 1:

    An expert who has achieved level 1.
    Governor:

    An expert whose answer got voted for 20 times.
    New Friend:

    An expert that has 1 follower.
    Corporal:

    An expert that has over 10 points.

  • Contributor
  • 4 Answers

Good grief.........where is the installation guide.........on viper web sight the guide is merely how to program the damn remote.....all 40 pages..

Posted on Dec 31, 2009

  • Anonymous Dec 31, 2009

    Here is the installation guide, good luck!

    ....

  • ultimatep121 Dec 28, 2010

    Here is the actual address for the installation guide directeddealers.com/manuals/IG/viper/N4102V_2008_09_web.pdf

×

Ad

Anonymous

  • Level 1:

    An expert who has achieved level 1.
    New Friend:

    An expert that has 1 follower.
    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Remote start don't work.

Posted on Nov 05, 2010

Ad

Anonymous

  • Level 1:

    An expert who has achieved level 1.
    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

No there is not....**** stick

Posted on Dec 28, 2009

Anonymous

  • Level 1:

    An expert who has achieved level 1.
    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

Go to viper web site there is a link for all there install manuals

Posted on Dec 12, 2009

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0 Answers

Viper 5101 1-way remote won't work after replacing battery

Jul 04, 2016 | 5101 LE 1 Way Car Remote Starter System

1 Answer

Wiring diagram for viper 5101 to install on 2006 toyota fourrunner
Go to autozone dot com and make a free account, then put in the year and make and model, look for the free repair guides and then go to the electrical diagrams.

Jul 21, 2013 | 5101 LE 1 Way Car Remote Starter System

1 Answer

Viper remote start system just installed. When I use the remote to lock the car--there is no longer a chirp noise that confirms I hit the lock key. Thanks, Mary
I don't know which remote starter you have, but I have a Viper 5101. To fix this problem, I started the ignition, then turned it off, leaving the key in the ignition. I pushed the Valet button (it has a blinking blue light, mine is near my rear view mirror) and held it. Then, I pushed it 3 times, then held it down a 4th time. Then, I pressed the lock button once. I pushed the Valet button again to take it out of programming mode, and it worked! I got this sequence of steps from the installation manual online: http://www.scribd.com/doc/45065156/Installation-Viper-5101 Hope that helps!

May 12, 2011 | Remote Start System

1 Answer

I need an installation guide for a Viper 5101 remote start system . Where do I go online to find one
I didn't try downloading it, but I was able to view it:

http://www.scribd.com/doc/45065156/Installation-Viper-5101

Feb 01, 2011 | Viper Security and Remote Start System...

1 Answer

How to install viper5101 on hummer h1 2006 model.
hi,
i have the installation guide for the viper 5101, if you need the same will sent it to you. it will help you to do the same. sent your email id will sent u the guide.
ok

Jan 24, 2011 | Viper Security and Remote Start System...

1 Answer

HOW TO HOOK UP THE CLIMAITE CONTROL ON A 2001 DOGE RAM 1500. CLEMATE CONTROL DOES NOT WORK WITH THE VIPER 5101 BUT EVERY THING ELSE DOES
Here is a copy of your requested guide.
http://www.directeddealers.com/manuals/OG/Viper/G4102V_2008_09_web.pdfsee pages 13 and 31
Please let me know if you have any problems with it.
Thanks
Bruce

Jan 03, 2011 | 5101 LE 1 Way Car Remote Starter System

1 Answer

I need instructions on how to use my viper 5101 remorte starter
go to www.directed.com this is the manufacturer of the viper remote starters, there you should be able to download instructions.

Here is how you program the viper 5101 remote.



Programming the Viper Remote Starter 5101


Unlock the doors before starting


Push and hold f button for 8-10 seconds until amber light is on solid


Push Remote start button for about 4 seconds till amber light flashes 3 times


Put key in IGN to the on position but don

Dec 30, 2010 | 5101 LE 1 Way Car Remote Starter System

1 Answer

Is there anything needed to install a viper 5101 in a 2009 honda odyssey?
You will need some type of interface module to bypass the transponder in the key inorder for the remote start to turn on the van.

Dec 23, 2010 | 5101 LE 1 Way Car Remote Starter System

1 Answer

I need the wiring diagrams to install a 5101 viper remote start on a 2007 Honda Accord with auto trans.
Have you tried this site yet?
Here is a copy of your requested guide.
http://www.directeddealers.com/manuals/OG/Viper/G4102V_2008_09_web.pdfsee pages 13 and 31
Please let me know if you have any problems with it.
Thanks
Bruce

Dec 15, 2010 | 5101 LE 1 Way Car Remote Starter System

1 Answer

Viper 5101 Manual Transmission - can't start
First off, is it in neutral? It can't engage the starter motor if it's in gear. Secondly, If it was professionally installed, why not just take it back and demand that they fix it?

Your wiring should somewhat match this.

Jan 13, 2010 | Remote Start System

Not finding what you are looking for?

View Most Popular

Security and Remote Start System (basic install included)

  • Home Security

Related Question

Viper 5101 1-way remote won't work after replacing battery

  • 5101 LE 1 Way Car Remote Starter System

Open Questions:

0 Answers

Viper 4806v won't program I am trying to install a viper 4806v two-way remote start/keyless entry in my automatic 2004 toyota camry LE 4cyl. I got the lock/unlock, horn, lights to work, and trunk pop to work. I can't seem to get the remote start to work. When I press the remote start button on the remote keypad, the car does not start and the headlights flash 7 times. Troubleshooting says 7 flashes mean a manual transmission mode error. This means I have to enter programming menu 3 and change the starter to automatic mode. When I follow the directions to get to menu 3, nothing happens because I cannot get to menu 3 when I hold down the control button after turning the ignition off. In other words, the control button is not working. The neutral switch is on like it is supposed to be. Kind of bummed about this. Could use some guidance. My wiring goes accordingly and this car does not have an immobilizer because I used a regular metal key to start it. This car has no alarm, just a stock keyless entry, trunk release, and panic button. Again, the problem is :The remote start comes in default manual transmission mode so I have to switch it to automatic transmission mode but I can't seem to enter programming. When I try to enter programming with the procedure followed using the control button, nothing happens. It does not chirp and the LED does not blink. I also cannot enter valet mode using the control button. When the car is locked, the LED blinks and stop blinking if car is unlocked ignition is turned on. I do not understand what is going on. VIPER 4806V Wires --->Camry Wires Main Harness 6pin connector H1/1 Red 12volt input (+) --> (+) White/Red at ignition Harness H1/2 Black Chassis Ground (-) --> Car Frame (-) H1/3 Brown 200mA Horn Output (-) --> Green/Black (-) at steering column H1/4 White/Brown Light Flash Isolation Wire --> NOT USED H1/5 White Light Flash --> Hazard Light Flash Relay Lt. Green Black wire (-) H1/6 Orange Ground when armed --> NOT USED Door Lock 3 pin connector 1 Blue 500mA Unlock Output (-) --> Blue Wire (-) white connector at driver kick panel 2 Empty --> NOT USED 3 Green 500mA Lock Output (-) --> Blue/Yellow wire (-) blue connector at driver kick panel Auxillary/Harness 24 Pin Connector 1 Pink/white 200mA Ignition 2 output/ Flex output (not used) --> NOT USED 2 Blue/White 2nd Status/Rear defogger output (-) --> NOT USED 3 Red/White 200mA Trunk Release Output (-) --> 5pin Relay Pin 85 (86 & 87 to +12V, 87a White/blue trunk wire toward dash, 30 white/blue trunk wire toward trunk) 4 Black/yellow 200mA Dome light Output (-) --> NOT USED 5 Dark Blue 200mA Status Output (-) ---> NOT USED 6 White/Black 200mA Aux 3 Output (-) ---> NOT USED 7 White/Violet 200mA Aux 1 Output (-) ---> NOT USED 8 Orange/Black 200mA Aux 4 Output (-) --> NOT USED 9 Gray Hood Pin input (-) ---> Installed at hood and Switch is open when hood is closed 10 Blue Horn input (Jumper set (-)) --> Green/Black (-) at steering column 11 White/Blue Activation Input --> NOT USED 12 Violet/White Tachometer Input --> Black/Orange wire on the Datalink Connector 13 Black Neutral safety/Parking Brake Input (-) ---> (-) Ground to metal frame of car. 14 Green/Black 200mA Factory Alarm Disarm Output --> NOT USED 15 Green Door Input (-) --> Red/Black Wire (-) (Door open indicator on dashboard) 16 Empty --> NOT USED 17 Pink 200mA Ignition 1 Output (-) --> NOT USED 18 Violet Door Input (+) ---> NOT USED 19 Violet/Black 200mA Aux 2 Output --> NOT USED 20 Brown Brake Shutdown input (+) --> Green/White Wire (+) at brake switch above brake pedal 21 Violet/yellow 200mA Starter Output (-) ---> 5 pin Relay pin 85 (Pin 86 & 87 is +12volts, Pin 30 black/yellow starter wire (+) at pin 8 in ignition harness) 22 Gray/Black Diesel wait to start Input (-) --> NOT USED 23 Orange 200mA Accessory Output (-) --> NOT USED 24 Green/White 200mA Factory Alarm arm output (-) --> NOT USED Remote start 8 pin Connector 1 Red/black 12v Constant Input for Acc and starter relay (+) ---> White/Red wire 12v (+) at ignition harness 2 Pink/black Flex relay input 87A key side (+) --> NOT USED 3 Pink/white Ignition 2/ Flex Relay output (+) --> Black/yellow pin 4 at ignition harness 4 Red 12V constant input for ignition 1 Relay (+) -->White/Red wire 12v (+) at ignition harness 5 Violet Starter Output (+) --> Black/White wire (+) at ignition harness 6 Accessory Output (+) --> Blue/Red (+) at ignition harness 7 12v Constant input for ignition 2 and flex relay (+) ---> White/Red wire 12v (+) at ignition harness 8 Pink Ignition 1 input/output (+) --> Black/Red wire (+) at ignition harness.

Oct 20, 2014 | Viper Security and Remote Start System...

0 Answers

Why does my viper remote light up and chirp several tones when it is not in use?

Oct 12, 2014 | Viper Security and Remote Start System...

0 Answers

how to program lock/unlock on viper 473v?

Jun 12, 2014 | Viper Security and Remote Start System...

0 Answers

how to program remote

May 26, 2014 | Viper Security and Remote Start System...

See all Viper Security and Remote Start System (basic Questions

Related Topics

Viper Security and Remote Start System (basic install included) Logo

Related Topics:

12,155 people viewed this question

Ask a Question

Usually answered in minutes!

Popular Questions

Viper Security and Remote Start...

Viper Security and Remote Start...

Viper Security and Remote Start...

Viper Security and Remote Start...

Viper Security and Remote Start...

Top Viper Home Security Experts

Brad Brown

Level 3 Expert

18564 Answers

Tom Chichester

Level 3 Expert

61169 Answers

Moderator Canada
Moderator Canada

Level 3 Expert

35917 Answers

Are you a Viper Home Security Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...