Just got bluetooth and no pin someone help me plz

startingwith the power off push and hold the call button while the head set turns on....then continue holding the call button until the light turns blue that has enabled the pairing mode now the pin code for all h300 model bluetooth device is 0000..i hope this helps

The factory default password for Bluetooth devices is 0000. If it is not that, then someone has changed it.

Hope that helps!

Your pin # is on the paperwork that came with your bluetooth device and a lot of times it is just 0000 or 1111. You can try this but I suggest you look at the paper work or call Motorola because they have techs that will be happy to assist you.

The quick answer is that you can put it into pairing mode, and your phone should recognize it. To put into pairing mode, push and hold the large power/answer button for at least 6 seconds. The light will start flashing, indicating that it is in pairing mode. Go into the Bluetooth menu on your phone and make sure Bluetooth is turned on, that your phone is visible, and that you can search for new headset devices. Make sure the headset is still flashing. When you discover the headset in the phone, it may prompt you for the code. I believe the pairing code is "0000". Add the device to the phone. You should now be able to use it with your phone.

If this doesn't get you there, do a search for H350 Manual to get a pdf of the user manual and quickStart guide.

it is '0000', they are all the same

You have to hold the on button until it is a solid blue light not flashing 5 or 6 seconds then it is ready to be paired.

Motorola uses four zero's

try pairing and entering the code 0000

Make sure that your speakerphone is OFF.

The PIN is 0000 (four zeros). I own one of these devices and you will need to enter four zeros when prompted. Make sure you have the Bluetooth function enabled on your phone, then turn your wireless headset on. Select "Add New Device" from your cell phone Bluetooth menu and it should work. Hope this helps you.