Question about Whirlpool Dishwashers

Open Question

NOT ALL SELECTIONS WORK

I have a Whirlpool Quite Wash Plus, model DU929PFGBO.
The rinse, china & pots and pans buttons all work. But the rest of the buttons will not work when you go to push them, nothing happens. Can this be fixed? If you can, what do I need to do to get it fixed? Is it something we can fix our self our would it have to be done by a repair man. We just bought the house & not really wanting to buy a new dishwasher at this time. It works great as it is, but I would like for the whole thing to work. I really love this Dishwasher.

Thank you
Amanda Hulse


[email protected] or call 501-745-3676

Posted by on

  • lucafx Dec 30, 2008

    Not all selections work.

    ven Normal/reset died several times - I fixed the problem by rebooting the electric circuit.

    Any real solutions? It's a quite expensive piece of junk

×

Ad

5 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

  • 70 Answers

SOURCE: remains on Gentle/China mode

unplug the unit from power and plug it in back after may be minute or so.if it works, fine otherwise control panel has to be chgd.it comes as complete assly(top black part) and it is very easy to chg.

Posted on Aug 18, 2009

Ad
thunderalley

thunderalley

  • 432 Answers

SOURCE: Whirlpool - only Heavy wash cycle works

bad timer

Posted on Sep 13, 2009

Anonymous

  • 1 Answer

SOURCE: Most Buttons on Front Panel of Whirlpool Gold IV not Working

Did you get an answer? I'm having the same problem

Posted on Dec 15, 2009

Daniel S

Daniel Scott

  • 4323 Answers

SOURCE: Whirlpool Gold Quiet Wash Plus

Hi

First make sure that nothing is blocking the drain pump assembly located inside the lower front panel of the dishwasher. If the issue returns after its cleaned then try to reset the dishwasher control by pressing the AIR DRY button and hold it for 15 seconds, if its still not resolved then it means that the control board has gone bad and should be replaced. Hope this helps...please post back for further assistance.

Daniel

Posted on Aug 25, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Dishwasher quits before Cycle finishes


Your dishwasher is shot. It expired around 2013.

May 27, 2018 | Whirlpool Dishwashers

1 Answer

How do i reset the consol on a westinghouse dishwasher with the buttons rinse only, quick wash, china crystal, normal, pots and pans, soak and scour, hi temp scour, sani scour, air dry and cancel?


Normally you will have to press High Temp and Air dry button alternatively 3 to 4 times within 8 secs until the whole panel lights up. Then press Cancel. That should reset the dishwasher.

Hope this helps. Welcome to fixya.com.. It is a public forum and you can also answer questions by selecting Solve Problems and answering solutions for problems on categories that you are comfortable with.

May 03, 2014 | Westinghouse Dishwashers

1 Answer

What is the sequence to reset kenmore dishwasher 665.16719000? The buttons from left to right are pots/pans, normal wash, water miser, china gentle, quick rinse, high temp, air dry, delay wash, start


Press "high temp wash, heated dry, High temp wash, heated dry, high temp wash, heated dry, high temp wash, heated dry, high temp wash"

All the lights will go solid at which point you press cancel to reset the board.

**NOTE** if you don't have a "heated dry" button, use the "air dry" or "energy saver dry" button instead.

Apr 03, 2014 | Kenmore 24 in. 16052 Built-in Dishwasher

1 Answer

Kenmore dishwasher model #665 15872000 is stuck on time saver option for washing and I can't get it to switch to any of the other options such as normal wash


Similar Kenmore Dishwasher 665.18664000. Time saver and Quick rinse were the only programs that would run. I pressed "high temp scrub" then "air dry" then "high temp scrub" then "air dry" and the machine went into a diagnostic mode and counted down from 10 while running a series of tests. After about 10 minutes and various test cycles the machine reset and the "normal wash" light had come back on. If this doesn't work then you may have a problem with the controller which other threads have mentioned replacing yourself for about $120.

Feb 11, 2012 | Dishwashers

1 Answer

Here again is my model and serial it stops in the middle of the cleaning cycle Kenmore 665.16773402 serial # ft0302854 Here is how I have been resetting the dishwasher. I hit the following sequence of...


Door latch.
Open and close the door to make sure the door latch is securely fastened

Hi-Temp Wash, Hi-Temp Rinse, or Sanitize options.
Some models have options that may require a water heating delay, such as Hi-Temp Wash, Hi-Temp Rinse, or Sanitize. Additional time may be required to heat the water to the proper temperature. The dishwasher will continue to circulate water during this heating delay but the timer will not advance until the proper temperature is reached

Oct 06, 2010 | Dishwashers

1 Answer

Most Buttons on Front Panel of Whirlpool Gold IV not Working


Did you get an answer? I'm having the same problem

Sep 25, 2009 | Dishwashers

Not finding what you are looking for?
Dishwashers Logo

Related Topics:

48 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Dishwashers Experts

Mike

Level 3 Expert

4363 Answers

Archie Ferrarini
Archie Ferrarini

Level 3 Expert

869 Answers

Bruce Denton

Level 2 Expert

273 Answers

Are you a Whirlpool Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...