- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Main digital board fault. Check and replace it. Contact any service technician. If you wish to get more details visit the site linked here. Usually a main board replacement might have to be followed by a firmware update. http://electronicshelponline.blogspot.com/ Search the site by type in the brand name of your device in the search box at the top right of the display window to get gathered all the related posts.
0286,0261. Try these codes. If you wish to get more details; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. Common codes used for devices too are given, in the order of device brand name list in alphabetical order. Pull up older posts. http://remotesearch.blogspot.com/ http://electrohelponline.blogspot.com/
Hello Three digit universal remote codes for Sharp tV are: 004/ 009/ 079/ 095/ 111/ 112/ 114/ 122/ 123/ 124/ 173 Four digit codes are: 0079 0123 0063 0020 0004 0009 0226 0266 0006 0095 0122
Direct Code Entry
Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand.
Based on the model number and type of remote control being used you can locate the code numbers for Sharp televisions. If you have tried all of those that came with the remote you can look up additional 3 or 4 digit codes (depends on whether or not the remote utilizes 3 or 4 digit codes) online.
Try encompassparts.com and see if they have the original remote. The channels you are getting are digital channels. You are going to have to get it back to analog channels.
I got a a sharp LC-32D43U and for my motorola cable box i use hte code 31 from jerrold, i take it from the manual and i got it tryin every single code unti i get one that works.
heb een code nodig voor het opnieuw instellen van de zenders
×