Can i pair jabra bt 2040 with lg incite and how?

Put your Jabra in bluetooth mode then on the phone scan for BT devices. Click on the Jabra and your done.

Hi,
Try 1111 or 0000
Thank You

company website or go cheap and break off the earpiece from a cheap pair of glasses and electrical tape it on.

default PIN is 0000... be sure to turn on BT on your phone first, then power on your jabra... your phone should ask to pair to the jabra and then you enter the 0000

Check that both devices are BT enabled and in pairing mode -ie, leds blinking-. If one of the device is not in pairing mode, it is normal that the process fails.

If you experience the same problem on other phones with your Jabra BCE-250 -same as mine-, you might think of getting it checked first.

I have the env Touch and the Jabra Halo. Initially, I had a problem pairing the two, then I realized that I was not following the directions properly. The manual shows two sections for pairing ("first time pairing" and "later pairing"). I was following the instructions for the former when I should have been following the latter. I also failed to notice that the BT indicator was flashing blue and not solid blue, as it needs to be, for pairing mode. So, if you haven't already done so, follow the instructions for "later pairing" here. Make sure that you see the SOLID blue light on the BT indicator on the headset when you try to pair.

its most likely 0000 or 1234

I took my husband's suggestion and used 0000 and it worked. My husband claims it is the factory default for all bluetooth headsets. Try it and let us know if it works.

Have you tired to pair your hub with any other non-Jabra headset? I am trying with Plantronics Voyager 520 without success ;(

BT350 passcode is 4 zeros... > 0000

http://www.jabra.com/Sites/Jabra/ap-en/headsetsupport/pages/Knowledgebase.aspx?kbid=9042862d-c51f-4611-98f6-dfe338dbf3ca