Question about Zenith HCS3000R Headend Controller For HCS1200T (HC-S3000R, H-CS3000R, HCS-3000R, HCS3000-R) Remote Control

2 Answers

Zenith Remote controller

MOdel number unknown but 124-202-01 and MBR 3440 are inside the battery compartment.
How do I make it work with DVD, VCR CD and TV?

Posted by gmkk on

  • 1 more comment 
  • gmkk Jan 23, 2008

    Haven't tried the fix yet but it sure makes sense. Will try the fix this evening and will rate the actual fix then or may have additional questions.

    Mike

  • debbs721 Mar 14, 2008

    I have the same remote (Zenith MBR 3440) for my 1995 model Zenith TV. The remote was working fine up until a couple days ago. The prg button does not light up at all (it has brand new batteries). Other buttons like the volume control and the mute button work. But not the buttons to turn the tv on, or the change the channels or to switch the tv to dvd/vcr mode. Is it a problem with the remote or could it be the television?

  • Ron Holtby
    Ron Holtby Jun 11, 2008

    Have a Zenith Remote 124-202-01 with MBR3440 on the inside cover of the remote. I've tried all kinds of numbers and generic numbers without any luck. Anyone know what the code is for my 1995 32" Zenith TV System 3 TV?

×

Ad

2 Answers

Anonymous

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 3 Answers

It's a Zenith remote, MBR 3440 is the model #, 124-202-01 is the part #. To program, press and hold PRG button until red light stays on, press TV,AUX etc, enter 3 digit code (www.xdiv.com) press Enter.

Posted on Jan 19, 2008

Ad

Ron Holtby

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Have a Zenith Remote 124-202-01 with MBR3440 on the inside cover of the remote. I've tried all kinds of numbers and generic numbers without any luck. Anyone know what the code is for my 1995 32" Zenith TV System 3 TV?
Zenith and LG TV support queue in Canada 18885422623 8-5 CST.
Zenith and LG TV support queue in U.S. 18779936484 24/7

Zenith 32” TV System 3 Model Number #SM2771S

Solution: Unplug the Zenith TV for approximately 5 seconds. Remove batteries in the Zenith remote. With the batteries removed press the TV button on factory remote and then the power button 5 times and hold the power button on the fifth time for approximately 10 seconds (I suspect this just clears the internal memory of the remote). Put the batteries back in the remote. Plug the TV back in and the remote should work again. My remote did work again successfully.

Posted on Jun 11, 2008

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I unlock region codes on a Toshiba SE-R0220 DVD/VCR player? I've tried many codes for other toshiba DVD players but none of them work :(


The Toshiba SE-R0220 is the REMOTE model number not the DVD/VCR model number!
You need to find hacked firmware for the DVD/VCR model number you have that releases the region settings.
Write it to a CD RW or DVD RW disc and follow the instructions for updating the firmware.
There is a chance that the firmware will not update correctly and you'll be left with a DVD part of the system that doesn't work.

Nov 03, 2016 | Toshiba Televison & Video

Tip

How to program your RM-V310 Sony Universal


Step 1: Entering the Code Number

1 See the supplied "Component code numbers", and find the threedigit

code number for the desired component.

If more than one code number is listed, use the number that's

listed first to complete the steps below.

For example, if you're setting up a Philips' VCR, you would use

the code number 035.

If your component isn't listed, see "Searching for the Correct

Code."

2 While pressing the SET button, press the

POWER button.

3 Press the button of the component that

you want to set up.

Note

On the VCR, CBL, SAT, AMP, CD, and DVD buttons, "video cassette

recorder", "analog cable box", "digital satellite receiver", "receiver",

"CD player", and "DVD player" are assigned respectively at the

factory. But you can also assign other components on these buttons.

For details, see "Changing the Component Type on the VCR, CBL,

SAT, AMP, CD, and DVD buttons."

4 Enter the component's code number.

For example, if you're entering the code

for a Philips VCR, you would press

.

5 Press and release the ENT button to store

the code number in the Commander's

memory.

6 Go to "Step 2: Checking if the Code Number Works" to finish

setting up.

Step 2: Checking if the Code Number Works

1 Power on the component you want to set up.

2 Aim the Remote Commander at the component and press a button

to check if that button works.

For example, press the POWER button to see if it works on your

component .

3 Check that the other buttons of the Commander is operating the

corresponding functions of the component.

You can write down the code number on the label inside the

battery compartment lid.

If the Commander Doesn't Seem to Be Working...

• First, try repeating these setup procedures using the other codes

listed for your component (see the supplied "Component code

numbers").

• If - after trying all the codes listed for your component - you still

cannot get the Commander to work properly, try the search

method described in "Searching for the Correct Code."


These instructions came from the Sony RM-V310 Operating Instructions Manual. To Download the Full manual for FREE click HERE>

on Oct 07, 2010 | Sony RM-V310 Remote Control

2 Answers

What is the code for my sony tv remote control DVD VCR COMBO


Ray, Check the attached links,remote codes.
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."

Sony eSupport Remote Control Codes Programming Select Model

New 3 digit codes for DVD VCR DVR SAT TV VCR TV DVD DVR CABLE and DVR DVD...

https://www.att.com/support_media/images/pdf/uverse/set-up-code-list.pdf

Mar 08, 2016 | Sony Televison & Video

1 Answer

Zenith MBR 3440 Universal Remote Control code list


Visit these links for more details. It has setup code list to many popular remote controls. http://remotesearch.blogspot.com/
http://electrohelponline.blogspot.com/
Pull up previous posts by its left sidebar, or type in the brand name and model number to of your set, to its search box, and press 'Enter' or view it in Mosaic / Timeslide option.

Sep 29, 2013 | Televison & Video

1 Answer

I have a universal DVD/VCR/TV remote and want to program but I don't see a model number on it, how can I fnd out what model it is?


When the model number is not written on the unit there are usually 2 other places where you can try to check for the model number. The back panel of most remotes have engraved on them some information about the remote while others have the information inside the battery compartment. Check both places for the model number.
Hope this solution has been helpful?

Apr 10, 2011 | Audio Players & Recorders

1 Answer

I need the code to program into a universal remote.


It should be one of the following: 0247, 0447, 0591.

If those don't work, please tell me the model number of your remote. You can find it inside the battery compartment.

Apr 08, 2011 | Symphonic WF803 DVD Player/VCR

1 Answer

I have a go video vcr/dvd player. The vcr works dvd doesn't


if this happens to all discs needs to be repaired.my panasonic was playing up and not very old,and cost me $350.00 for a new driver.

Jan 03, 2010 | GoVideo Go Video DVD/VCR Combo

1 Answer

Zenith dvd/vcr mod #6711R1N211C. Need to prog the volume button.


In my manual, to control a sony TV.. the code is number 8 or number 9.

You will hold down TV POWER, hit 8 then release TV POWER.
If that doesn't work, try number 9. Once the batteries are removed, it resets the code, so write it down. It will also over ride your old codes once you input the new one.

Note: Depending on your TV, some or all buttons may not function on the TV, even after entering the correct manufacturer code.


I looked for the section on Stereo, but all I found was the above.
Hope this helps.


Nov 22, 2008 | Zenith XBR411 DVD Recorder/VCR

Not finding what you are looking for?
Televison & Video Logo

1,426 people viewed this question

Ask a Question

Usually answered in minutes!

Top Zenith Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76287 Answers

matt martin
matt martin

Level 3 Expert

1257 Answers

 Grubhead
Grubhead

Level 3 Expert

5700 Answers

Are you a Zenith Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...