- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Tengo un control remoto marca taika TKB-AC y Busco el codigo de programacion para un minisplit marca LG
Traductor: I have a remote control taika brand TKB-AC and the programming code looking for minisplit brand LG
1) HOW MUCH COMPUTER MEMORY DDR MEMORY DOES YOUR COMPUTER HAVE INSTALLED?
2) HOW MUCH FREE SPACE IS ON YOU CURRECT HARD DRIVE?
3) TURN OFF YOUR ANTI-VIRUS SOFTWARE AND SPYWARE DETECTORS THEN DO THE FOLLWOING:
A) UNPLUG SCANNER FROM COMPUTER
B) MAKE SURE THE ANTI-VIRUS AND SPYWARE DETECTION SOFTWARE IS TURNED OFF FOR THIS INSTALL.
C) INSTALL SOFTWARE FROM ORIGINAL CD/DVD
D) ATTACH SCANNER AND ALLOW IT TO DETECT THE SCANNER AND ALLOW IT TO SEARCH FOR BEST DRIVER.
E) IF THIS DOES NOT WORK THEN EMAIL ME AT [email protected]
have light turned off with scanner, or drive it a few miles to see if it goes off. just because the sensors have been changed the pcm thinks there is still a problem and keeps light on. turn off with scanner.
turn off the scanner, disconnect and reconnect it from the computer. if it still doesnt scan, reinstall the scanner driver(make sure you install the latest version) then restart your computer. hope it'll help. good day. =)
The only thing I can surgest is that you check installed programs I found that the 750 is very fussy about being the only kid on the block. Maybe worth trying a commercial program that says it will remove "junk" from your hard drive
quite possible the scanner motor finnaly gave out but lets look at other things first
try connecting to another usb port on comp before that completly take out all of the scanners drivers and programs this could be a simple file corrupt
i know you tried this but sometimes putting a new driver over old driver doesnt usually change the old drivers properties this is when you completly take out all drivers and software and start from scratch for this scanner
×