-
Master
11,896 Answers
- Posted on Nov 16, 2009
Re: Trying to find a tv code for an Apex TV using a RCA...
Programming a Device using Code Search:
- Manually turn ON your device (TV, VCR, Cable Box)
- Press and "HOLD"
CODE SEARCH
- Press and release the device button you want to set up (TV,
VCR, Cable Box) However, if you are using AUX for a device, press and release
AUX first and then the device button for the type of device to be programmed
(TV, VCR, or Cable). The selected device button will flash once.
- Release CODE SEARCH.
- Press OFF/ON repeatedly until the device turns off (you
may have to press up to 100 times at a rate of once per second).
- Once the device turns off, press and release ENTER.
- With the device on, press
any other button. If the device responds, no further programming is required.
If the device does not respond, repeat steps 1-6.
Programming a device using the Code Lists:
- Find codes for each device and brand below.
- Press and "HOLD"
CODE SEARCH.
- Press and release the TV, VCR or Cable button you want
to set up. If programming AUX for a device, press and release AUX first
and then the device to be programmed (TV, VCR or Cable). When the selected
device button flashes proceed to the next step.
- Enter the three digit
code (apex is not listed for this remote)
- Release CODE SEARCH.
- With the device on, press another button, for example CHANNEL UP. If
the device responds, no further programming is required. If the device
does not respond, repeat steps 1-5 using another code number from the lists.
×