The hp ipaq 6915 i have just shows the serial,hp

maximum limit recomended buy HP is 2GB,

gimana cara membuka pasport hp ipaq

If you can remove the memory stick and you have a multi-card reader, then you can use a PC to format the memory stick. If you don't have a multi-card reader, you can buy one from [here].

1. Insert the reader into a free USB port and wait for your PC to recognise it.
2. If given the option, choose to view the folder, otherwise double click My Computer.
3. Right click the icon that represents the memory stick (depending on your setup this may be labelled as drive E, F or G).
4. Choose the Format option.
5. A new window will appear, choose Quick Format and your memory stick will be formatted.

WARNING! This will wipe the entire contents of your memory stick, so please remember to take a backup first.

Hello alone-cowboy,

Here is the manual for you with step by step instructions on how to use your unit. I have link you to the complete manual with specifications, resources, Picture illustrations as well as trouble shooting section. I hope this helps you. If this does, please if you can, rate my solution accordingly and some nice words would be appreciated.

http://ec1.images-amazon.com/media/i3d/01/A/man-migrate/MANUAL000036051.pdf

Also if you like, here is my link to my own pages on fixya of other areas in my expertize. I am also completely trained and certified in Automotive, Appliance and of course Electronics. Here is my personal Link to my page. Thanks Mike

http://beta.fixya.com/users/mc1bean

Try hard reset: pressing and holding the calendar and iTask buttons and doing a soft reset for 2 seconds.

Hard resetting a WM 5 HX 4700 is to press and hold the Contacts and Mail buttons and then doing a soft reset. The boot screen will popup with a message “To perform a clean reset, which will clear all data in memory, press the [Calendar] button”

If that fails, try upgrading to wm 6 or wm 6.1 then downgrading afterwards.

I've upgraded from wm2003SE to wm6.1 alkor rc2.2 rom.

ROMs: http://wm6.winmobile.us/hpmain.htm

Download the user manual on the right hand side of this link:
http://safemanuals.com/annexe_Reference%20Guide_HP_IPAQ%20HW6915-_E.htm

Click on this link or copy and paste the complete link into your browser.
If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe


I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

Hey,

If you only have issues in your car and it charges fine in the house the the problem is with the car charger


Let me know if you need anything else.


Thanks,
Ekse

hi
I can fix your sync&charge connector very fast in our lab.

you can send your device to us and we will charge you by paypal and return it to you in less than one week.

thanks
:)
Gery
ipaq Lab

Try a Reset....
Performing a Clean Reset will help
A clean reset clears all user-installed settings, programs, and data, and restores
your HP iPAQ to factory settings.
To perform a clean reset and return your HP iPAQ to factory settings:
1.Press and hold the Answer/Send, Power, and End Call buttons.
2.While holding these buttons, use the stylus to lightly press the Reset button on the bottom of the HP iPAQ until the device restarts.
3.When the HP iPAQ restarts, release all of the buttons, and then remove the stylus from the Reset button.
The HP iPAQ restarts and powers on.
Thanks