Question about Maytag Atlantis MAV6000 Top Load Washer

1 Answer

Maytag atlantis washer making loud grinding noise

Our washer has been making grinding noises lately and yesterday the noise stopped but so did the washer. I unplugged it and plugged it in again later, so I could try to get the rest of the water out. It ran again for about a minute and then shut off again. I can't even manually turn the drum. Now I have a washer full of water and don't know how to get the water out. I also don't know if it is the bearings, belt or transmission that has gone out. My husband says it is just cheaper to buy a new one. What do you think?

Posted by on

  • Anonymous May 14, 2008

    making horrible grinding noise and won't aggitate

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 619 Answers

The belt are tear and slap to the near obtacle need to replace /
The water magnetic valve are leaking ned to replace /the coil open or valve rusted.

Posted on Jan 10, 2008

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Washer makes grinding noise when it agitates


check back of unit as the concrete on the back may of been dislodged check not over loaded also the belt maybe loose or streached

Jan 02, 2014 | Crosley CAWC529JQ Top Load Washer

1 Answer

Maytag centennial washer


Put some water in the washer tub, a few gallon should do it. Then turn machine back on, it will recognize when the water has drained out and stop that cycle.

Aug 05, 2017 | Washing Machines

1 Answer

GE JVM1650 Microwave Making Loud Noise


hello Frank. Sorry to tell you that the magnetron is going bad and making that terrible noise. Since the inside of a microwave, even unplugged has up to 2000 residual and deadly volts of electricity I recommend either calling a pro or replacing the unit.

Jul 12, 2009 | Microwave Ovens

1 Answer

Won't start. Harsh grinding sound from starter


Starter has teeth that mesh with teeth on the flex plate . most of these type grinding noises are do to missing teeth on the starter gear or flex plate missing teeth .Does your vehicle have a automatic transmission ? Have you had starter replaced lately ?

Mar 31, 2017 | 2000 Oldsmobile Silhouette

1 Answer

Whirlpool washing machine makes grinding noise


Hello Friend, Your solution is a real quick fix. The problem you are having is very common, your motor coupling has broken and that is what's making the grinding sound, also in this condition it will always pump out the water. Go to your local appliance parts store and purchase a new motor coupler, your cost should be under $25. It's very simple to remove old and install new coupler. First remove two screws from control panel and tilt control panel backwords exposing area under panel. You will see a metal clip on each side of cabinet under panel. Remove these clips, and unplug wires from plug in on cabinet. Remove cabinet by lifting up in back and tilting forward. Once removed you will see the innerworkings of your washer. Lay washer on it's back and remove the two spring clips that hold water pump in place and remove water pump. Leave water pump hooked up just move to side out of your way. Then you will remove the two screws that hold the motor clips in place and just snap the motor clips off. Be sure to unplug the wire harness plug from the motor. Just simply lift the motor straight up and off of the transmission. There you will see the motor coupler broken and to replace, just pry old one off transmission and motor with large flat head screwdriver. You will notice that one half of coupler is attached to the motor and the other to transmission. In the coupler kit you will receive both pieces and the rubber center connector. Just replace all the old with all the new and your problem will be solved. Happy to help, Tim.

Jun 20, 2009 | Whirlpool Washing Machines

1 Answer

Whirlpool Duet Washer Making Loud Grinding Noise


not nesseccarrily your pump, possible you have a rear bearing going bad, which will sound as if a helicopter is coming through your laundry room. ( noisy pump can be the issue , honestly a better and cheapre problem to have) in order to determine if its apump problem you can remove the lower access panel and unplug the pump then start the spinn cycle, if it still loud the pumpms not hte issue.

Nov 20, 2008 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Whirlpool washer Mod# TWAS750PQO, Ser# CR3520005


is it possible that the washer was overloaded? if so the agitator has little plastic "gears" that move the agitator one way only, they could have made the sound. 
you can also check under the washer to see if anything (like a coat-hanger or something) is interfering with moving parts of the washer

Jun 27, 2008 | Whirlpool Ultimate Care II LSQ9549L Top...

1 Answer

Scanner making grinding noise


Please open and apply oil on roller rod as some rust have accumulated on it prohibiting it move.

Jan 01, 2008 | Canon CanoScan LiDE 30 Flatbed Scanner

Not finding what you are looking for?
Maytag Atlantis MAV6000 Top Load Washer Logo

Related Topics:

398 people viewed this question

Ask a Question

Usually answered in minutes!

Top Maytag Washing Machines Experts

jimorris77

Level 3 Expert

411 Answers

Sheldon Dedek

Level 3 Expert

909 Answers

Bill Long

Level 3 Expert

606 Answers

Are you a Maytag Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...