Question about Dishwashers

Open Question

My zug adora 55n dishwasher has just finished wash cycle, but all lights are flashing on front panel. what does this mean?

Posted by ruth_kell34 on

Ad

2 Related Answers

freetek

Steve Allison

  • 5569 Answers

SOURCE: Zug Adora 12s Dishwasher

Perhaps the solution to your problem can be found in the User Guide- 

Your model number appears with two suffixes; WW and BB thatmay only be color codes but user guides (which appear to be identical) areavailable for download from GE’s site:
 
http://products.geappliances.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=49-55031.PDF
 
 

Posted on Oct 02, 2008

Ad
rylee_smith

Rylee Smith

  • 8619 Answers

SOURCE: ge adora dishwasher water won't fill

Hi


Thanks for using FixYa. To start with check the water inlet valve which is located behind the lower access panel on the left or right side of the Dishwasher. If the water inlet valve is bad you have to replace it, also check the main water line for clogs/obstructions. If still the issue is not resolved then it’s a bad float switch and needs to be replaced. Please do rate the solution if the issue is resolved or post a comment for further assistance.


Thanks
Rylee

Posted on Jun 02, 2010

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My dishwasher won't actually turn on this morning. When I push the start button, it hums, and the lights by the cycles flash, for about two minutes, but it won't actually run through a cycle.


Your motor is probably stuck.
Remove power from the D/W.
Remove the lower access panel. The motor will be in front of you.
Turn the blades in the end of the motor counterclockwise until the motor turns freely. You will need a flat screwdriver to reach in and turn the blades.
When it frees, repower and try it again.

Mar 14, 2009 | GE Adora GHDA654LBG Dishwasher

2 Answers

Zug Adora 12s Dishwasher


Perhaps the solution to your problem can be found in the User Guide- 

Your model number appears with two suffixes; WW and BB thatmay only be color codes but user guides (which appear to be identical) areavailable for download from GE’s site:
 
http://products.geappliances.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=49-55031.PDF
 
 

Oct 02, 2008 | General Electric Adora GHDA670N Built-in...

1 Answer

All Lights Flashing on Hotoint Aquarious WF310 Washing Machine


Means that the heat sensor is broken.
Replace that and it should fix your problem

May 09, 2008 | Hotpoint Aquarius WF000 Front Load Washer

1 Answer

Normal wash flashing Red


We have the same problem with kenmore model 66513839k600
we press light wash and normal wash lights up, we have to wait over a month for sears to service. This will be the second control panel they will install on warranty, a month is far too long a wait for service on any appliance.

Dec 03, 2007 | Kenmore 24 in. 17039 Built-in Dishwasher

Not finding what you are looking for?
Dishwashers Logo

Related Topics:

205 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dishwashers Experts

Michael Thomas
Michael Thomas

Level 3 Expert

3056 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

Brad Brown

Level 3 Expert

18563 Answers

Are you a Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...