Cant active to my ps3. asking for my pass key?

Hi Richard

Try putting in 0000 this is normally a default pass code for most Bluetooth items hope this helps

Another user tried 0000 just now and it worked immediately.
hold the button down for about fifteen seconds when you first switch on (you will hear the second beep)

Your pass code/key will be 0000

You must put your headset in pairing mode, prior to making your PS3 search for new devices. To do it, start with your headset turned off. Then, press and hold the MFB (Multi-Function Buttons) for some 8 seconds, until the indicator light is steadily lit in blue. Now, make your PS3 search for new devices. After a little while the WEP200 should show on-screen. Select it and make it connect. If a pairing code (or PIN, or passkey) is requested, enter '0000' (four zeros).
By the way, if your headset's user guide happens to be missing, feel free to download it from this location (if this link fails, please, let me know. I will upload it to some file sharing server for you).
Hope you are able to sort your problems out soon.
Regards, Carlos

The generic pass key for all blue tooth devices is 0000. I assume you are trying to pair with a blue tooth transmitter.

you go to accesory settings, then manage bluetooth devices then register new device. It will ask for the key which is 0000

Greetings,
The passkey is generally 0000 or 1234.
Take care,
-WN

The default passcode for headsets is usually 0000 or 1234. If those don't work, check your instruction manual.

Hope these work for you!

Try using 0000 - this is the default passcode.

Try 0000 or 1234