When i put a game in my ps3 it reads the disk then it starts an stops on a black screen then gives me an error 8005010f an sometimes the game starts an it freezes during game play

Hello, It's possibly lens calibration problem, sometimes that happens when there's a lot of sudden movements during transportation, sometimes the use of scratched disks tend to trigger the Error correction algorithm of the PS3 reader, putting the reading lens into a lot of stress that heats up the EC chip and games are not read properly, causing the game to fail loading and making unusual sounds.
I recommend not to use scratched disks, try to use only PS3 game disks only to extend your console's life, and take good care of all your disks, keep them clean.
The thing is as technology improves Disks format changes to put more information into a single disk, and precision looking for data is more critical as data sectors are closer to each other, so scratched or dirty media tends to return errors.
Hope I helped, and try to seek some professional help on calibrating/substituting your old reader.

Your laser lens is failing or getting dirty. You need to replace it or clean it. Not too hard, there are videos on youtube on how to.

The only thing to do is get it checked. If you got yours a while after it came out you have a bad lazer. (thing that reads discs) you have 2 get it fixed. Play n trade is who i reccomend. google them. PS: my gamertag is NEROROTT I have all call of duties + a few others like borderlands

It needs a new laser because the old one is "burnt out". It's a really common problem with them.

You could replace the laser or the entire Bluray drive.

I buy my parts at http://parts.consolerepairguy.com - the laser are about $75 each and Bluray drives are about $95.

In your caseme, best bet might be to get the whole drive.

I run a repair business and that place has best prices aside from Hong Kong which I don't trust.

Follow the Disc Read Error guide here and see if it fixes the problem: http://www.xtremeps3.com/2009/07/28/im-getting-disk-read-errors-how-do-i-fix-it/

there might be 2 things wrong with it. 1 the laser is broken or not working right. and 2 the code files that are supposed to read the disk are corrupted either way if you still have warranty on it i would go back and get a new one as long as its not your fault there would be no problem replacing it

PS3 is one of the most amazing gaming device but like other competitor gaming devices (Xbox and Wii) It also has some problems like No Display Problme. You may check out the informative blog post at PS3 Repairs blog

Hope it helps to fix the problem.

Hi my neame is Juan and I have the answer for you what is happening is that the laser get hot and stop reading the disk sometimes at the begining of the movie or game sometimes 10-20 minutes after the movie have started but if you press the PS logo then you can exit the movie or game and back to the main menu and the solution you need is to replace the laser lens you can do this or have someone do it for you sinse you eed some special tools look at the back label of your playstation and see what model you have all models start with a CECH- -01 look for the two letters between the h and 01 and I can tell you wich laser to get ther eis two diferent lasers I do sell lasers too but I don't have them listed on ebay right now I am a thrusted ebay power seller and I do sell parts for the ps3 so this is why I know your problem really good thanks and good luck

Check the bottom of the disk for a clean surface, make sure you have updated your PS3 to the current version 2.60 (1/24/2009), and make sure the PS3 can still read other disks (dvd, cd, other game)

Can you be any more specific? is this a problem with one disk, one type of disk or all disks? What is the exact error you are getting? Are you trying to play a game, play a film, play an audio CD or are you using your PS3 as a Linux computer and trying to open a data disk? have you tried more than one disk? Without specifics there's just no way to guess what the problem is.