53uwx10ba hitachi My hitachi only make a 'click' sounds when I press on on the remote or on the TV. Nothing happen when I pressed the On button. I need your help on how to fix this. Many thanks! George
clicking noise and led on front panel blinks. replaced convergence chips and reflowed solder joints. still have problem. Power board?clicking noise and led on front panel blinks. replaced convergence chips and reflowed solder joints. still have problem. Power board?
AnonymousJan 23, 2009
i need the manual in order to figure out how to work the remote control
i need the manual in order to figure out how to work the remote control
You can't post conmments that contain an email address.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The codes are, 0145,1145,...Step 1. Turn the TV on. 2. Press the TV button. 3. Press and hold the SET button until the LED blinks twice, then release. 4. Enter one of the four digit codes, the LED will blink twice. 5. Aim the remote at the TV and press the POWER button, if your remote does not have a power button, press PLAY, the TV should turn off, if not, try steps 1-5 again using a different code....hope this was helpful...
Darren my name is Abraxos1 and I had a similar problem with my Hitachi. Write to me and let me know what you had to do to fix the problem. Thank you very much. [email protected]
Hi, Your tv model has a small light blue color button inside for manual adjustmnet mode. You will have to remove the front covering below the screen. its just attached with velcrow. Then there will be a centre wooden pannel with the the switching box screwed to tv front with around six screws.Open this panel and look to the left corner of the chasis boards in front of a small metallic box. Thats the switch you have to press to get into manual adjustment mode. use remote to adjust the colors. once done press it again to exist. Visit www.fixurtvs.com to find out more about tv FAQs. Thanks if you found it helpful.
TV - Made Nov. 1993, and the picture is so razor sharp clear that when my Cable company come by , one and all always say, "is the HD because the picture is so execeptional one it. When I say "no", the argue and say that they have NEVER seen a TV. that is no HD with such a perfectly clear picture. I get complements on it all the time. I picked it up in a pawn shop in 1995 for $200.00 .
I just need the code for the T.V. only, lost it. So I can use my remote again, thanks.
The TV. Model is a CT 2043B HITACHI MAKE.
Yes, only one click. It sounded like the power is being turned on and off right away.
No blinking lights.
Thanks!
clicking noise and led on front panel blinks. replaced convergence chips and reflowed solder joints. still have problem. Power board?
i need the manual in order to figure out how to work the remote control
×