How to key in a code crcr 4258 - RCA Universal Remote Control

If you wish to get more details, check this site. Pull up older posts there. Setup code list and setup proceedings to many popular brand remote controls are given. Three digit, four digit, five digits and two-digit code list are there. Check the site with patience. Surely you'll get a solution to your problem. Search the site by 'Timeslide' option. It will make search easy. Or, type in the brand name to your device into its search box, and press "Enter."

Hi,

Kindly check and confirm the model number of the remote. The closest match available on RCA website is RCRN03BR

To get the code, kindly use the remote code finder tool on RCA website by clicking this link.

On the page which opens, select the model number of the remote from the drop-down list. Then select TV for the product type.

Then a complete list of programming codes will load.

Hope this helps. Thanks for using FixYa.

20001,20593,21593. Seen some people using sylvania codes that worked as well? If you need a code list please comment.

http://157.254.235.130/public/IBR53FMcodesREVb.pdf

this should help

Press and hold the component key (TV, SAT•CBL, DVD•VCR, DVR•AUX) you wish to program. The LED turns on and remains on.

Keep holding down the component key. If you release the component key any time during the Direct

Code Entry procedure, the LED blinks four times, and the process is exited. The last programmed code under the component key is retained

get the full manual for free including all codes HERE

Hello littlemoney, You can view and download your manual at the following link:

• RCR-4258 Manual

It will be in PDF format. If this was not the manual you were looking for please post a reply. Thanks for using FixYa! Edward

Serial: 1045-1087-0042-9969-4346-1209
Activation: 0065 7989 0006 0764 9725 4258 3044
Auth: 7208 1393 6952 0802 8253

This is for the old CS2, but it may work for this too. Good luck.

1. 1. Manually turn on the component you want the remote to control (TV, VCR, DVD, DVR, satellite receiver, or cable box).
2. Press and hold the component key (TV, SAT•CBL, DVD•VCR, DVR•AUX) you wish to program. The LED turns on and remains on. Keep holding down the component key.
3. While holding the component key down, press and hold the POWER key. The LED turns off. After holding down both keys for three seconds, the LED turns back on.
4. Release both keys. The LED remains on.
5. Press and release the POWER key repeatedly until your component turns off. Each time you press the POWER key, the LED blinks, and the next code in the list is sent. This process continues until all of the codes in the Code Lists have been tried. If your component turns off, you have found the correct code. (If it cycles through and the LED blinks four times and turns off, all codes have been searched. The Manual Code Search method is exited.)
6. Once you have found the correct code, you must save the new code by pressing and releasing the STOP key. The LED turns off. You must press the STOP key to save the code or the correct code will not be stored! When you press the STOP key, the code is stored.

Click here to Download full manual with codes

Big button remote rcr 4258
does not have all the codes for every product,

Please give me the model # for the cable box -scientific Atlanta and the model # for Magnavox T.V.
also goto www.replacementremotes.com (336)969-1842
They will find you REPLACEMENT remote control CODES, not remote control