I have a toshiba 1370 copier....the repair wrench is flashing and won't let me continue, how do i get the wrench to stop blinking?

Have you tried resetting the copier by unplugging it and waiting a few moments? If you problems persist check us out online for all your copier repair or Copier Rental needs.

i am having toshiba 1370 black & white copier it is not clear repeating the letter in paperToshiba 1370

This simply means that your copier thinks it is jammed. Look for any bits of paper in the machine. If no paper is found clean any sensors that you see.

hold down the c and 8 key this will give you a code give me the code i will tell you the fault

IT SHOWS YOUR SETTING IS OUT OF ORDER AND YOU NEED TO RE SET IT BY GOING INTO SP MODE.

What is the wrench code it is displaying????

check and pullout jam

Press 0 and 8 down before you turn on the machine, holding these down turn on copier, the display should say "ad" press 89 then start ( display will say 3 ) press 0 then start display goes back to "ad" turn off and on copier if wrench comes back take off red cover over hot section and in the middle there is a thermostat (1 screw) and toner build up under it needs to be removed.

You should be able to retrieve a code for a malfunction by pressing down the clear/stop and 8 keys. then let me know what you get, and we will go from there.

Press the clear and the 8 button at the same time . This will give you a error code. I will guess that you have a "C7". If you still want to fix let me know error code.