Question about Hobart Food Processors
Hi, I just received an older 1612 Hobart, and fixed the same problem.
First i disassembled the linkage from the bottom, then i used a propane torch to heat the rods and the aluminum castings (carefully, bring the temp till it is hot to the touch) Hammering doesnt work well so i made a piece of pine appx 1x1" with a notch to use as a pry stick. put a thin piece of plywood against the casting so you dont crack the housing, as it is thin alum.
Worked for me, take your time
Posted on Jan 03, 2010
Tips for a great answer:
Dec 23, 2016 | Rival Food Processors
Nov 13, 2015 | Rival Food Processors
May 18, 2015 | Sunbeam Food Processors
May 17, 2010 | Kenmore KFP-70 Food Processor
Nov 09, 2009 | Rival Food Processors
Oct 28, 2009 | Food Processors
Oct 08, 2009 | Rival Food Processors
Sep 09, 2009 | Hobart Food Processors
May 08, 2008 | Food Processors
Usually answered in minutes!
Step 2: Please assign your manual to a product: