Want to know what Center in looks like audio 1 black 1red 1white and says vao on Sharp 55R-WP-4h projection 2001

You need to take a meter and see if you have 220 volts between the black and white. if you do have 220 then hook white wire to the red on the on the thermostat and the black to the black wire on the thermostat. on the other side of the thermostat hook the red and black to the red and black to the heater

Check with www.TVrepairkits.com - they don't have one listed so goto there site to email them...

These sets need to have all three colors - RED - BLUE - GREEN - lined up correctly on the screen in order for the picture to look normal. When its out of alignment the video will look 3-D, wavy, distorted, etc. Most of the time you just need to adjust your convergence in the menu. If you cannot adjust it in the menu - then your convergence is broken and needs to be repaired.

Convergence problems are very common on all Projection TV sets including Sony,Samsung, JVC, Philip Magnavox, Panasonic, Akai, Pioneer, Hitachi, Zenith, and others. You can get a convergenece repair kit wiith instructions from the links below.

Here are some of the most common problems with these sets...

Problem #1) Convergence

Yours may have one or more of the following symptoms

• Screen Looks 3-D
• Colors wont align
• Screen may look distorted or warped
• No Audio/Video - makes a chirping sound.

Problem #2

Another common problem is dull or washed out video.
Your TV may have one or more of the following symptoms....

• Dull looking picture
• White looking picture
• Halos around objects
• Red/Orange looking picture

You can see some more examples and find a fix here
http://www.fixya.com/support/r2861467-solution_video_looking_whiteish_dull

STK ICs they are big black ICs Mats has them 1-800-628-1118 they will have part number on them example STK392-110

I don't know about your particular TV. But on my TV I have go to input on my remote and pick component. On my other TV It has RGB but there is two of them and I have to pick the right one. If this helps give me a positive vote. Thank you.

I don't understand. Standard RCA cables are Male at both ends, in/outputs on standard devices are always Female. What's the problemo? One pair is all that is needed.

if you know the STK number you can get them on EBAY or MCMELECTRONICS.com

http://www.ehow.com/how_114206_replace-headphone-plug.html

The FBT for that is Sharp p/n# RTRNF0043MEZZ and is available at Vance Baldwin for $184.76 plus shipping...
To my knowledge there is no subbing that to an ASTI or HR Diemen either..
Bill