Rctangular box that suddenly appeared in the upper left corner

There is a device in the fuse box that should look like a rectangular box in the upper left corner. Its the flasher relay. That is most likely the culprit.

A crude manual/guide is available here http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c00496280
There are two power supply connectors labeled AT12V small square 4 pin upper left corner and 24 pin rectangular and ATXPWRR1 upper right between memory slots and floppy drive connector

1. Click yahoo messenger first.
2. From the rectangular box type your yahoo I.D. like for example ventura.jake
3. Then form the second rectangular box type your password.
4. Then click sign In.
5. If you do not have any yahoo I.D.and password try to register first to messenger of yahoo,then look for the word Register(upper left corner of the page).
6. Fill up all the requirement information need,then after click create my account.
7. To verify go to your email.

Hope this simple information could help you to solve your problem. Mam/ Sir don't forget me to rate me up, I really appreciate what ratings you will given to me. Thanks a lot and God bless.

In order to calibrate the screen on the Nuvi 1260T, you need to follow these few simple steps.

- Turn off the device
- Hold the upper-left corner of the screen while turning on the device
- Release the power button when the Garmin screen appears
- Continue to hold the upper-left corner of the touch screen for 30 seconds until a white screen with "Press dot" appears.

This should allow you to calibrate the screen. I hope this helps!

hardware failure

It is what we call a "Shatted Pixel" and you can fix it by flashing your screen

Plug in player, which computer will then recognize.
Open WMP10 and then click the SYNC tab.
Click RECENTLY ADDED along the left column - your desired book(s) should be among those items to appear.
Upper right, in the small, square box for devices, your player should appear as the transfer location.
Now, physically drag the book(s) across to the right, and drop the item(s) along the right where it says "drag items here" [vertical rectangular box].
Click START SYNC at the bottom of that very box to send all of those books to the player.
When WMP says 100% complete you should have your playable (items)!

look on the remote (tv and dvd) for a button that says "info" or a button with a picture of a tv with a symbol in the corresponding corner. WOuld help to know the make and model for both of these.

check for filter(capacitor) problem in the video portion of the tv, and control could be dirt or finger contamination inside the remote.

this means the TV having picture upper part of the screen. problem may be -15 V to vertical deflection ic suddenly gose off and system control gose to stand-by mode resolder vertical out ic , -15 v supply line from the fly back and system control .