When I print a picture it is greenish. All the

Did you refill the cartridge? If so, then you will need to reset a chip on the cartridge somehow. Usually epson doesn't sell "refill" ink unless it is an EcoTank series printer.

HI,

Your printer has a built-in waste ink tank for the ink used during print head cleaning. As time goes by, the waste ink tank gradually fills. When the waste ink tank is nearly full, you should receive a "Waste ink warning" error when you print. Press the RESUME button on the printer to cancel the error so you can continue printing. Before the waste ink tank becomes completely full, have the waste ink tank replaced.

Dear Friend, Check & confirm the following will help you...

• Check ink tank situates Properly
• OR Install recommended Ink tanks in Perfect Order
• OR Remove Tape[Confirm there is no Orange tape across the top of ink tank]] From the Ink tank
• OR Replace Ink tank
• OR Perform Deep Print Head Cleaning
• OR The Print Head may Need Replacing

>i860_install_inks_animation Click here


Above picture is the Correct View.... If this helped you,Do rate ME...Thanks For Contacting FixYa....

It depends what type of things you are printing. If you are printing text, you should be able to print more pages. If you are printing photos, you are using more ink per page. If you use more of one color, you may also run out quicker. You didn't say if you were running out of ink in the black or the color or both cartridges. The black cartridge is rated at 200 pages and the color cartridge is rated at 150 pages. This is based on printing pages that may differ drastically from what you actually print. Here's a web link that explains this in more detail.

http://www.hp.com/pageyield/articles/us/en/IsoInkjetYield.html

Next time you buy a printer, spend a little more and find a printer that has a larger cartridge (check the number of ml (milliliters) in the cartridge). These printers cost a bit more but you will save on the cost of the ink. Cartridges all cost roughly the same regardless of how much ink they have. You can also look at websites that rate each printer cost per black and white and color pages.

Hope this helps. Good luck!

If you are using re-manufactured ink tanks, that would explain it, a mi-matched ink tank. To clarify the ink colour is not quite right.

If genuine ink tanks (Recommended) then maybe try different paper. If using photo paper you should be using compatible / genuine paper as the different chemicals react can give this problem.

If using fax / standard paper then could be print head fault....normally get an error code.

because,some of your ink catridge colors are completed with your prior usages,, you have to replace your ink catridge,,..

It's up to you. Epson have best head design using micropiezo. we just to replace ink tank to continue printing. Or if using CISS, no maitanance. Just fill the bottle. All ink tank must be inserted, when printing, even we just print black, to preserve ink dried at head. Actually, if we just want black ink print out, we can insert empty yellow tank, but level indicator (program) not ink out.

Inkjet printers have a fibrous pad inside them that collects the waste ink from cleaning the print head. Over time, this pad fills up with ink and can no longer hold any more. When this occurs, the printer indicates a "waste ink tank full" error.

Replacing the waste ink absorption pads is something an authorized canon service facility can take care of for you. Once they are replaced, it'll be functional again.

perform deep cleaning and nozzel cleaning from the printer properties

cleaning the ink tanks did help a lot but it's still not perfect, can age of the printer affect print quality at all
thanks so much, amanda