Neosat ipro 2000 fta receiver dead

I Have Neosat 9500 super receiver, and its locked and i try to use 0000 but not open please help me to open it

Hi,

Your query > "Instructions on how to install new keys and activate an FTA receiver using a 2GB Cruzer Micro Flash Drive with 3 smarth technology"

Generic responses:
1. depending on your FTA receiver (brand/model/version) (BlackBird, MultiStar, UltraStar, Pansat, Digiwave, Viewsat, Coolsat, Fortec, Ariza, Twinhan... or even clones) you would need to download the appropriate firmware/satellite keys using your PC & Internet connection;
2. links to firmware/satellite keys maybe available from your FTA receiver manufacturer's website or forums such as HashHU FTA
3. in your PC, unzip the downloaded firmware/satellite keys to a temporary folder;

If you are using a stand-alone hardware FTA box:
a. plug in your 2GB Cruzer Micro Flash Drive to one of your PC's USB port;
b. copy/paste the unzipped files in the root directory of the Flash Drive. Verify that you have the .bin or .pmg of whatever your FTA box is using;
c. remove flash drive from PC's USB port and insert into the USB port of the FTA receiver;
d. on the FTA box, using your remote, go to Menu, Settings or Sytem Information, keys, firmware or receiver Upgrade, select USB, select Flash, Save, Activate or Upgrade;
e. wait until the FTA box has uploaded to itself the new firmware/satellite keys;
f. reboot (power on/off).

If you are using PC-based FTA satellite receiver:
i. run your FTA receiver program;
ii. select for Tools/Options/Upgrade or Update;
iii. browse/direct to search in your temporary folder where downloaded files were unzipped;
iv. once found, click OK/Update/Upgrade;
v. in some brand/model/version, there is an auto upgrade/update feature which will download appropriate firmware/satellite keys if you are online.

Hope that the this be of some help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards.

call to customer care and tell about this reason he will give the solution

if your hooking it up just to ur TV you would need The RCA Video Cable, Video- yellow, Red - right, white is left,Witch is printed on the back of the box, this would go into the output an go in to TV input
Hope it works

join a fta forum. You will find a lot of info. You need to do a sat scan
good luck!

user guides fta files bin files and factory files are all free to download never pay for a fix! go to tvkeyz.com and join for free all the help u need is there ! if this helps please vote for me

plz chack your conection perporly

You need to search for FTA site

Hi,
I am using viewsat extreme 2000. After downloading the new program PC-STB. Front panel power has gone. Only rear light on. All view has gone.
Would you please send me by email, how can I solve this problem? I shall be grateful if you please reply.
Thank you.
-Rajesh
[email protected]

www.ftabins.net