Look to find remote and power supply for vc-c4

Type "Sharpe VC-H982U Service Manual" into Google and you will see a free PDF of it. That should tell you the number!

You shouldn't need any drivers for your Mac, but you may need some extra software to use the camera.
You can download the software from the official Canon website here:

Canon Support Drivers VC C4 VC C4R

1st You download Webcam Driver.

Canon VC-C4 Network Camera Driver

After this install the Webcam driver in the system.
Installation of Webcam Driver
Go to the control panel
Click on the System Icon
Click on the Hardware Tab
Click on the Device Manager s
Select the Unknown Device or printer device where yellow Question Marks sign on it.
Right click on it and uninstall it.
After this go to the top of the device manager and click on scan for hardware changes.
Driver installation Wizard start.
Brows Your Driver from the Hard Disk and click on next.
Driver will be install.

You can download everything that you need for this camera from this link, just click HERE.

You can get the remote on the links below.

http://www.emtcompany.com/toshiba-vc-p3s-remote-control/1012671.html

http://www.electronicadventure.us/Merchant2/merchant.mv?screen=prod&store_code=EA&product_code=VCP3S

http://remotes.com/store/toshiba/vcp3s.html

http://www.google.com/#q=Toshiba+VC-P3S&hl=en&sa=X&tbs=p_ord:p&tbm=shop&prmd=ivns&ei=Oj-zTZTqGpS-sAOS44HpCw&ved=0CAoQuw0oAQ&bav=on.2,or.r_gc.r_pw.&fp=84f9a73b468239aa

The power supply is definitely overheating. SO if tweaking the fan doesn't help, then replace the power supply

try to use this linkhttp://www.canon.com.sg/section/contactus/?enqtype=TechEnq&enq_detail=Copiers

You will find the drivers here

http://canon.driversdown.com/Canon-driver-list/s_538_1.shtml

DO you realize that this camera cost around 900 US$? - Might be a little overkill for VOIP.
Apart form that it is an excellent camera. Have look at the manual here.
The camera connects via RS232 (9DSub) or 8pin DSub and you can/have to download the software form Canon's web page.

Hi Pandjoy,
I have been struggling with the same problem and almost rebuilt the power supply before finding the solution. In my case it was a faulty capacitor-C4, next to the diode D4. Replacing C4 and the machine performed as new. I hope this helps. Cheers
SteveO