Can I change my new link from a new uploaded movie

If you wish to get some details; check the site linked here. Pull up older posts.
http://electronicshelponline.blogspot.com/

hai risolto?

If you have swapped out your old factory radio with another factory radio from a different unit, it will not work. It is coded to the VIN#, Just to replace a radio at the dealer you must link up and download the current configuration from the old unit using the GM TECH-II, then remove the old unit and install the new one, upload the old config files to the new unit and hope it works. Sometimes it doesn't and you have to keep swapping units back and forth to download and upload and eventually maybe getting a successful upload. If all your doing is replacing the factory unit with another factory unit, it will work if you take it to a dealer and they do the process explained above. Just don't throw out your old radio, they will need it because all of your old config files are still in it!
I hope this info helps!~subyguru~

find out what format your lg thrill is using so the videos will be working when you upload it to your LG..
Uploading is easy..if there is a USB cable that came with the LG then you can use it to connect your LG to your computer.
Once connected you can click your LG and copy the videos or movies you wanted to upload into your LG folder.
After uploading then you can disconnect and go to your LG and click the movies that you uploaded.
But remember the movie format should be the sme format that your LG supported otherwise your phone cant read the files and that means you cant watch the movies..
Enjoy your videos and hope i helped..

hi Richard, I found that too, also, when the DVDs had finally burned they all ended early, mostly just half a second or so, sometimes they would only burn say 45 seconds, even though the timeline ( the blue line above the tracks in edit screen) was stretched way past the end. Also it wouldnt upload to You Tube. What we've done, my mate and I, weve downloaded Live Movie Maker, you go to Microsoft site and download , I cant remember, its either Windows Live essentials, its something essentials anyhow,you have to download the whole package but it downloaded easily. I just googled movie maker. the old Movie Maker wont work with Windows 7, but this new one does, we re did all 13 movies of our songs, using the Magix movies we had already made as reference, and they burn easliy to DVD and they upload to YouTube really easily too. We are using MP4 clips, and it accepts those too. We had so much trouble with Magix ive now deleted it altogether and will go on with WindowsLlive Movie maker.

Camera is required to shoot the movie but then to upload you might need to transfer your movies to a computer which must be linked to the internet. Now based on what site you need to upload , log in to the site- or UTUBE- and connect to the UPLOAD link to complete the process. Similarily you can download to the PC the required files.

by putting video link like if you want to upload video from youtube then click here

http://www.youtube.com/movie/dil-toh-bachha-hai-ji?feature=mv_b_nr

> tech guy said that the main-board needs to be replace.
> Is there any way to repair the same one?

Yes, but it will probably cost more than to buy another camera.

You probably can remove the disk-drive, and connect it to your computer, to "rescue" any movies currently on the camera.

Or, if you purchase an identical camera, you can temporarily "transplant" the old disk-drive from the old camera into the new camera, and then upload any movies to your computer. Then, re-insert the new disk-drive into the new camera.

Here is a link to the users manual. You just need to change the registration information.

http://usa.copystar.com/americas/jsp/upload/resource/13716/0/FAX-SYS-L-ENOG.pdf