Motherboard S5112 error code 5d - Tyan Tomcat i7210 (S5112G2NR) Motherboard

The 5d code is actually an Sd code and it means suds have been detected in the washer. This can indicate to much soap or the wrong kind of soap was used in the washer. Be sure HE detergent is being used. If can also indicate the drain pump is restricted or the drain hose is kinked.

My kenmore he2 plus washer gave me a 5d code and door locked ...

https://www.youtube.com/watch?v=-v66USc48o0

Whirlpool Duet Sport ht 5D/F21 Error Fix - YouTube

? 5:40
https://www.youtube.com/watch?v=2dV3FLzWPTM
Aug 6, 2013 - Uploaded by Mariela Gonzalez-Aroche
Steps in this video may be used to repair both F21 and 5D error codes. ... which is located on the bottom right corner of thewasher machine.

On the 5D error code 30 appears to be shutter related and general advice is to get a professional repair or send it back to Canon.

Error Code 80 on the 5D II indicates the a
Malfunction related to the electric control of images has been detected.

My 5D error was certainly a water heater error because I changed the thermostat for a more elevated value before the error occured.
I have never used this value before and coming back to my usual value solved this error.

Hello,

Sorry for the delay. Unfortunatly, you can not add a graphics card to your laptop without having to redo the video port on the motherboard itself.

C2Solutions

5d is a definitely a the code for a plugged discharge. We removed the lower access panel and discovered a virtual treasure: $12.50 in quarters, nickels, dimes and pennies, a pen, a pencil, collar stays, 10 bobby-pins, 3 barrettes, a elastic headband, a draw string, a box cutter, 3 washers, 3 broken zipper parts, a elastic waist band. Amazing it took all to trigger a 5d error code. Hope this helps!

Error Code 5d: Initialize Init Onboard Super IO switch.

Generally caused by a mismatched RAM stick int the MIDDLE RAM slot. Try using a single stick of RAM and boot, make sure you do not put this single stick of RAM in the middle slot, and it should boot right up.

Error code 26 could mean faulty or not properly seated RAM or video card. Can also mean keyboard error. Error 5D is an audio problem. Hope this helps.

I picked this up from an abit forum, It appears that it is quite common, look here, http://forums.hexus.net/abit-care-hexus/104674-abit-ab9-pro-code-25-error.html