I am installing a jvc thather system and do not have the code to set up the remote control, my tv is a haier

Remote Control Code List

www.jumboremotecontrol.com/remote_control_code_list.html
Jumbo Universal Remote Control · 8 Device ... Programing codes for the remote. If you do not see your device listed, you can use the code search feature to program the device into the remote. TV Codes ... JVC, 013,054,055,060,065,067,089.‎Guide to Programming the ... - ‎Download the Manual - ‎8 Device Learning Jumbo ...

What is the universal control remote code for a JVC television?

www.ask.com > Technology > Television & Video
JVC universal codes can also be found on the instruction sheet or manual guide that comes with the remote control or television set. If these universal codes do ...

JVC Remote Codes

remote-codes.findthedata.com/l/163/JVC-Remote-Codes
A list of TV, HDTV, DVD, Receiver, Audio, Amplifier and and VCR remote codes forJVC. images for codes for universal remote control jvc

There are no known codes listed for Haier with this remote, but you can CODE SEARCH to see if it uses the same codes as another Brand.
1. On the remote control, press TV once.
2. Press and hold SET until the LED
blinks twice, then release SET.
3. Enter 9 - 9 - 1.The LED will
blink twice.
4. Aim the remote control at the the
TV and slowly alternate between
pressing POWER and TV. Stop when
the TV turns off.
NOTE: In the search mode, the remote
control will send IR codes from its library
to the selected device, starting with the
most popular code first.
5. To lock in the code, press and hold
SET until the LED blinks twice, then
release SET.
6. To search for the codes of your other
devices, repeat steps 1 through 5, but
substitute the appropriate device key
for the device you are searching for.

Manual and codes Here: http://www.remotecentral.com/cgi-bin/files/dl.cgi?file=others/one_for_all/urc4330-manual.zip&area=other

To find a code for your Haier TV with the URC-3021, you will need to use the auto-search function of your remote.

To search for a code for your TV:
1. On the remote control, press TV once.
2. Press and hold SET until the LED (red light) blinks twice,
then release SET.
3. Enter 9 - 9 - 1.The LED will blink twice.
4. Aim the remote control at the TV and slowly alternate
between pressing POWER and TV. Stop when the TV turns off
(after pressing POWER).
NOTE: In the search mode, the remote control will send IR codes from
its library to the selected device, starting with the most popular code
first.
5. To lock in the code, press and release SET. The LED will
blink twice.

http://resources.jvc.com/Resources/00/00/99/82841ien.pdf

programming a device: make sure batteries are installed correctly. Turn device on(for ex., your TV). Press TV button next to Power button on your 15-2147...Press and hold the little P button until the red LED lite blinks twice...enter the first four-digit code for your device(in your case,JVC TV...first set of #s is '0463' ) note: the LED will blink once as each number is entered. If the number is correct the LED will blink 2x. Note if the LED doesn't blink twice after entering the 4 digit code, begin again with the next set of numbers. For JVC the codes are 0463 and 0053. Once your remote blinks twice after entering in your TV code, press the power button. This should turn off your TV. Just use like any other remote. Hope this helps you.

It will work with a Total Control TV Replacement Remote Control, which you can get from argos for £7.99.


There are only 2 codes for a haier tv.

Setup Code : 0698
Setup Code : 0264

We have a Haier TV model 3 HL32R2a, the cable remote no longer turns the set off or on or controls the volume. We can only do that with the tv remote. Tried putting in the universal code, and the Haier code and it didn't work. Please help.

JVC SETUP CODE IS OO53FROMURC-3220