Bush 5693D 24" TV Logo
Posted on Jan 06, 2008

Bush lcd 27006 standby flashing

My bush lcd tv suddenly turned itself off and now has no picture or sound but the standby light is continously flashing red. many thanks

  • 4 more comments 
  • Dogcat Jan 06, 2008

    My Bush 32 inch LCD tv. clicks on for a moment then goes blank. Any answers?

  • k66yla Feb 10, 2008

    My 27" LCD decided to stop working tonight, the screen went blank and the sound was distorted, I switched it off and then tried turning it back on, red standby light is flashing continuously, no response from any buttons.

  • Anonymous Feb 15, 2008

    standby button continuously flashing with no sound or picture

  • Anonymous Apr 05, 2008

    standby red light flashing

  • Anonymous Jul 20, 2008

    Red standby light flashing, but unable to get the tv to go on. I have turned off but to no avail

  • Steve Austin
    Steve Austin Jan 02, 2018

    Me too my bush tv keeps going into standby


1 Answer



Yeah your psu needs new capacitors.

  • martin1507 Mar 31, 2011

    I had this problem so I bought a new PSU and fitted it and I still have the same problem????

  • michael s
    michael s Dec 03, 2019

    have u try turning the tv off, and taking the wire from sugit, for 15 second, while holing down on the power butten.

    then pug it in and leave it for 10 second. before puting it on that mite work


Add Your Answer


Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:


The blue standby light on my bush 19" lcd tv stays on all the time but i get no picture or sound can you help.

The II2 Bus has the fault. It detects some malfunction from other circuit boards. Your TV need a through checkup. Contact any experienced service technician, as the work is a very skilled one, and not a user reparable.

Lcd tv light flashing but no picture or sound

If you removed power by turning off power itself to the set instead of turning it off by turning the set itself off---that is not a good thing to do.

When power is restored a surge can and likely hit the power supply in your set---time for a tech or shop to open it---I suspect they will find the standby or main power supply is damaged or now bad.

BUSH 42" plasma no picture or sound?

You have a power supply problem, replace the Module.
What you ear is a click relay No juice to activate the relay
Some cups may be dried.

Flashing "Standby" light??????


Samsung HLP4674W - changed bulb - still no picture - lights flash

If the lamp has been replaced I would think the Lamp ballast would be most likliest followed by the color wheel and then the Digital board. You can get any part needed for your model at www.tvrepairworld.com just leave them a email they respond quickly.

Sony trinitron tv when turned on gives sound but no picture. the standby light is continously flashing though. any ideas ?

Resolder all ground connections on the chassis tv. Or maybe picture tube is bad.
Thank you

Sony Bravia KDL 46", no picture, standby light blinks 4 times

Since the TV is still receiving power, the problem is going to be with the TV's mainboard.  After you unplugged the TV and plugged it back in, you said the power light went out again, so I assume the standby light wasn't flashing again?  The flashing standby light is indicating an error code so my suggestion is to contact Sony for service options regardless if there is a warranty or not because service is the only solution to this situation.  Don't forget to provide them the error code or 4 flashes repeating.

Bush lcd tv turned itself off won't come back on

My Olevia LCD TV did the same thing. I turned off the back power switch and pulled the power cord as well. Left off for a couple of minutes and then re-connected cord and turned on main switch. I then turned on the front power switch and it come on just fine. These new sets have computer-like guts so you have to re-boot them sometimes. I hope this works for you.

Bush id tv

Dear Sir, unfortunately tonight you will not be able to watch this TV set. Please try with an alternative solution. This job definitely requires a professional technician Best regards, Arpi
Not finding what you are looking for?


Ask a Question

Usually answered in minutes!

Top Bush Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1259 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

john h

Level 3 Expert

29494 Answers

Are you a Bush Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides