Question about Washing Machines

1 Answer

Whilpool washing machine model "Duet ht" fornot load

My machine doe not work and show "controal Locked" is lighted, any suggestions? email me at [email protected]
thank you

Posted by on

  • Anonymous Mar 09, 2008

    My machine does not work, "control Locked" is lighted, but nothing else. I can open the door, the clothes are soaked. I have unplugged the washer,let it sit, but it still will not work. Is there a way to "reset" the program? I have tried everything I know to!

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 319 Answers

Press and hold the End Of Cycle Signal button
for 3 seconds to turn this feature off.


When the dryer is running and Control
Locked light is on, the dryer can be stopped by
pressing the Pause/Cancel button, but cannot
be restarted until the control is unlocked.

Good Luck, hope this FIXED YA

Posted on Jan 06, 2008

  • Brian Berndt
    Brian Berndt Jan 07, 2008

    Did this help your problem? Please let us know!

×

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Duet GHW9150P Front Load Washer: My whirlpool duet ht washer shows an L20 error mes...


L20 is not a valid error code.

Unplug for 40 minutes and re-try.


Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

May 17, 2010 | Whirlpool Duet GHW9150P Front Load Washer

Tip

Why Is WHIRLPOOL Duet & Duet HT washing machine showing F/dU error code on...


The F/dU is shown on the display due to Door Unlock Error in the washing machine.
In this problem check the Door Lock in the washing machine. Either the door is getting blocked or not getting locked or the door latch assembly is got cracked.it needs to be checked and replaced.
This will help. Good Luck.

on Mar 11, 2010 | Washing Machines

Tip

Why Is WHIRLPOOL Duet & Duet HT washing machine showing F/dL error code on...


The F/dL is shown on the display due to Door Lock Error in the washing machine.
In this problem check the Door Lock in the washing machine. Either the door is getting blocked or not getting locked or the door latch assembly is got cracked.it needs to be checked and replaced.
This will help. Good Luck.


on Mar 11, 2010 | Washing Machines

2 Answers

I have a Whirlpool Duet Sport (model #WFW8400TW03) that shuts down when I press start. There are no error codes and the last cycle ran with no issues. The door is shut and seems secure. I can find nothing...


I had the same problem. My control lock was on without the status light on. To unlock the controls I Selected and held END OF CYCLE SIGNAL button for at least 3 seconds. The lock/unlock control status light never indicated the locked position, yet my washer now works. NOTE: Select and hold END OF CYCLE SIGNAL button for 3 seconds to toggle between lock and unlock.

May 18, 2010 | Whirlpool Duet Sport HT WFW8400TE Washer

1 Answer

Whirlpool Duet GHW9150PW1 very noisy when spinning


its most likely bad bearings and basket. usually it happens over wear and tear or overloading.

May 21, 2009 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Control locked is on, how do i unlock it ?


I think you're on line. Okay, power shd be on, see that button 'end of cycle' on the right side of your panel? Hold it down for 3 seconds. You'll be ok. Dont forget to rate, its a way of saying thk u!

Mar 25, 2009 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

WHIRLPOOL DUET HT FRONT LOADING WASHER


This is a strange problem. I work on these all day, and never have a problem getting these boards. Might want to try and calling local part houses for this part.

Oct 18, 2008 | Whirlpool Duet GHW9150P Front Load Washer

3 Answers

Washing machine


whilpool awo/d 4305 light onclean pump can i do this myself

Jul 25, 2008 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Where is the reset button for the Controls Locked to be released??


Press & hold down the 'end of cycle' signal button till the control light goes off

& rate me pl................

Jun 12, 2008 | Whirlpool Duet GHW9150P Front Load Washer

21 Answers

Whirlpool Front Load Duet Dryer


Holding the End Cycle button for a few seconds worked! Yes

Aug 20, 2007 | Whirlpool Duet GHW9150P Front Load Washer

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

169 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1481 Answers

Marvin
Marvin

Level 3 Expert

85206 Answers

Brad Brown

Level 3 Expert

18110 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...