Who to wire JL audio 12w6 to its max - Jl Audio 12W6 Car Subwoofer

Specs say it depends on the impedance of the speakers.

https://www.jlaudio.com/products/jd250-1-car-audio-amplifiers-98360

https://www.google.com/search?q=jl+250%2F1+amp.+Wiring+diagram

..

Hi, if you're going to run a smaller wire, you also need to use a smaller fuse. A 50 amp fuse is needed for 8 gage wire. The fuse is there to keep the wire insulation from melting, which is what will happen if you run too much power thru the wire. If you don't plan to turn the amp up too high, this may work fine, but I would test it first with a 50 amp fuse before installing. You will need all of the speakers hooked up and the gain set to max to test the power draw. See the following link on wire sizing for more info: http://www.bcae1.com/wire.htm

try fixmyspeakers.com they can almsot def help you

yeah you can always take it back to your local JL audio dealer, i wouldnt do it your self unless you done it before and got it down like a ****. A lot of people i know tryed and always ending up tossing it out.....

the wires or the or is the subs haves many watts

these subs are rated at 400 watts rms ... hope this helps

oh no you need a more powerfull amp i recommend selling the one you have and upgrade to a bigger amp ive had the same problem or if not unbridge your amp so it dosent work the amp to much

any 800w should do

YOU JUST NEED TO REPLACE THE VOICE COILS TRY EBAY THEY DONT HAVE TO BE FROM JL AUDIO.

Nope!! I burnt up my 12W6 from supposedly under powering it. Your going to have to pay for a new coil if under factory warranty. Other wise ..... spent good money on a paper weight. Sorry for your loss, I know that I was pissed. :-(