Need user's manual for Mitsubishi HD-6000

There may be more numbered numerical models, but here is one of them. It has a 320GB HDD.

Toppro TPR-5000 User Manual - ManualsLib

https://www.manualslib.com > ... > Receiver > TPR-5000
View and Download Toppro TPR-5000 user manual online. High Definition Digital Terrestrial Receiver Personal Video Recorder. TPR-5000 receiver pdf manual ...

am_witek,

Our 625 receiver is not an HD model. Our current HD models are ViP 211/211k, 222, 612, 622, 722/722k, 922, and our Hopper receiver.

If you have any other questions, let me know!

Tommy Faust
DISH Social Media Representative

Hello

Your TV will display all High Definition signals as 1080i True HDTV™ and all standard definition signals will be displayed as 480p.

Component Inputs 1-2
YPbPr(480i/480p/1080i)
These inputs can be used for the connection of A/V equipment with component video outputs, such as a DVD player or external HDTV receiver. Please see Appendix B for signal compatibility.
Input DTV (480i/480p/1080i)
This input is used to connect an external DTV receiver, and can be configured for YPrPb and RGB plus H&V signal types.

As a special feature, you have the ability to adjust the red and blue light beams in reference to the fixed green light beam. This process is called convergence. There are two separate memories for convergence. One, for SD 480i/480p signals; the other for HD 1080i signals. SD convergence should be adjusted while watching an SD source and HD convergence should be adjusted while watching an HD source.

Wide Expand: Enlarges the picture, cropping some of the image on both sides. This Expand format is useful to remove or reduce black side bars on HD broadcasts of 4:3 images with black bars. Available for analog 1080i, digital SD 16:9 and digital HD signals.

InputDTV
This input is compatible with most standard DTV and satellite receivers with component video (YPbPr) outputs. Compatible DTV signals are SDTV 480i/480p, and HDTV 1080i. All other DTV signals, such as 720p, need to be converted by the DTV receiver to one of the compatible signal types. Please check the DTV receiver specifications before connecting.
This input is compatible with some DTV receivers using RGB with "separate H and V sync". Compatible DTV signals are SDTV 480i, 480p, and HDTV 1080i. All other DTV signals, such as 720p, need to be converted by the DTV receiver to one of the compatible signal types. Industry standards for DTV RGB signals (systems, synchronization, timing, and signal strengths) are not currently established. These inputs will not be compatible with all DTV receivers that offer RGB, HV outputs. RGB, HV signals with less than 5 cables are not compatible.
If your DTV receiver offers both DTV component video signals and DTV RGB, HV signals, we suggest you use the DTV component video signals. Check the DTV receiver specifications before connecting.
Ok.

You can download the user manual from this link.

http://safemanuals.com/user-guide-instructions-owner-manual/SAGEM/PVR%206280%20T%20DE-_D

HDMI is the best

www.antennaweb.org

If you're 15 miles or less away, rabbit ears
If you're 20 miles or less, omnidirectional outdoor
If you're 50 miles or less, mid range
80 miles or less, long range

Print off your results from antenna web and bring them into a local RadioShack or some place near you that sells antennas, and they can help you find your best fit.

Check the Innovage manual for the automatic code search. If it works, you still may not have full control of your HR20. Try to program your Directv remote to operate your components

Greetings kathy76turne,

In February 2009 you will be unable to receive ANY analog television signals therefore the digital converter box will be a necessity to receive any over the air broadcasts.

I am unable to answer the question about the mini van's electrical capability, however you might find the following link handy to get more information.

http://www.bestbuy.com/site/olspage.jsp?id=pcmcat120600050013&type=category

Thank you!

Dorothy
Go Ahead. Use Us.

I have a sr605 Onkyo receiver and just hooked it up to a new Mitsubishi 73" and I could not get the picture to work, sound did though. Here is the problem the Onkyo is HDMI 1.3 but TV calls for HDMI 1.3a. There is a big difference between the 2 and the Onkyo will not work with TV. The newer model TV'S say in the manual Category 2 V 1.3a. You need to make sure that all your parts are compatable. It makes a big difference.

i started at 00 and worked my way up the list and found a code which made the dvd contoller work on my LG tv. got to 06 b4 it worked.