Question about Roper RAS8445KQ Top Load Washer

1 Answer

Washing machine stops at rinse cycle

I have state washing machine top load made by whirlpool.When it comes to rinse cycle it get stop and does not drain water. please help me.
Thanks
Rashid
[email protected]

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 196 Answers

Sounds like a faulty lid switch. The switch will not allow this unit to drain/spin if the switch is faulty.

Posted on Jan 12, 2008

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Washer stopped during spin cycle


Hello, try to checked the pump filter, and the pump is actually working. then I would suspect a draining problem.
If filter clean and pump works fine then it could be a control module fault. if this were the case, then it would probably be wiser to purchase a new washer.
Thanks

Jun 04, 2010 | Whirlpool LTE5243D Top Load Stacked...

1 Answer

Stops in the middle of wash cycle


Hi!

If the cycle doesn't advance, it's probably the timer or a cold-water supply problem:
It's the timer, if your washing machine fills with water and begins agitating, but the timer never advances--or if the washer is in a spin cycle and the timer won't advance. Then you need to replace the timer.
It may be a cold-water supply problem, if the washing machine fills with water, agitates, drains, and spins, but then doesn't fill with rinse water. See There's no cold water.
Please do rate this solution as FixYa and revert for further assistance.

Thanks
Rylee

May 29, 2009 | Whirlpool Ultimate Care II LSQ9549L Top...

1 Answer

Washer won't drain after rinse cycle


If you lay the drain hose down into a bucket does water come out fairly quickly?

If so then it is not a blockage

You may have a coin or other small object in the pump which stops the impeller turning so no pumping action

Only solution is to check if the pump is free to turn either via the filter opening or taking the back panel off (Remove power before doing so ) and turning the pump by hand (there will be a fan blade on the end which is connected directly to the impeller.

If that will not turn very easily then you need to take off the hoses and check what is happening with the pump unit

Apr 13, 2009 | Whirlpool LSR5132PQ Top Load Washer

1 Answer

WHirlpool Waser model LSR8133HQ0 - tries to fill for rinse cycle


hellow my name is joyce and It sounds like you have a issue with your cut off valve that controls the water flow to your machine in between cycles, this is controled by your timer switch you may want to call technichian to repair. sounds like the only problem you have with the timer is on the rinse cycle not the wash cycle, but it defently needs to be fixed. if I can help you find a repair person please let me know.

thanks you and let me know if I can further assist you.
joyce

Feb 06, 2009 | Whirlpool LSR8433K Top Load Washer

1 Answer

Whirlpool Washing Machine that doesn't complete the cycles


I too have a whirlpool top load and it did the same thing. I would put a load in and go back and the clothes were sitting in water. I found that if you close the lid and press gently til you hear a click, it will finish the cycle. So now when I load the washer, I press the lid like that and I have not had the problem since. I hope this helps.

Jan 20, 2009 | Whirlpool GR399LXHS Electric Kitchen Range

1 Answer

Whirlpool Washer - Imperial Series Quiet Wash 2


your washers drain hose is too far down the drain pipe which is causing a siphoning action pull the washers drain hose out pipe some you should be able to hear water dropping into the pipe the reason it only happens in the rinse cycle is because the water from wash is being drained and before the water vacuum is broken the rinse water comes in causing it to keep draining

Dec 30, 2008 | Whirlpool Ultimate Care II LSQ9549L Top...

1 Answer

Won,t drain on rinse cycle


Ok mc we need a timer at this point. You see the timer doing several steps different than before.

Nov 01, 2008 | Whirlpool Ultimate Care II LSQ9549L Top...

Not finding what you are looking for?
Roper RAS8445KQ Top Load Washer Logo

Related Topics:

249 people viewed this question

Ask a Question

Usually answered in minutes!

Top Roper Washing Machines Experts

Marvin
Marvin

Level 3 Expert

85206 Answers

Mike

Level 3 Expert

4363 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1481 Answers

Are you a Roper Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...