I bought this car that has the vm9512hd and it will not come untill i enter the un lock code i do not have it is there any way to bypass it

lock your door and hold the key in that position, and then turn it the other way and hold it until they roll up, this should set the alarm back. If that doesnt work try replacing the radio with the stock one, your third option is to bypass the alarm module.

get in car put key in ignition and turn to number 2 then press the button on the key fob. until the doors lock and un lock, should be reset then.

Hello
I thinks that you have its original remote handset with you now, and posts this solution. If you don't have it, either buy a new original remote handset or try to get it from any of your friends and relatives, who owns the same model of Mitsubishi Tv, you have now; only to unlock it. After unlock, you can use any other remote control.
Mitsubishi sets use a four-digit code for a V-Chip locked program, view a locked TV, cancel the lock, or to enter the V-Chip lock menus. You can view the locked shows on the TV set by pressing the number 9 and QV buttons on the remote at the same time, whenever your code is requested. This process temporarily unlocks the TV and asks you to enter a new code.
OK.

1 try un plug and plug back in
2 if not work enter menu and look for settings and look for parental lock or ratings most codes are 1234 / 0000 / 5555 or 8888 but if you changed code i will not know
3 open dvd and look for rubber belt and cog then turn it until dvd draw opens ( UN PLUG FIRST )
hope this helps
MERRY CHRISTMAS

If you are refering to the Theft Lock code, you must first push the right sequence of radio buttons to enter the un lock mode in the radio's computer. Once the radio's Theft Lock Identifier code is displayed, you then enter the un lock code into the radio. Ususally, this is a dealer operation as they have the online program to retrieve the unlock code after they submit your Theft Lock ID code. I'm wondering how you were able to get a unlock code without the dealer's assistance.

hi
menu > settings > security > change lock code > apply master code in place of lock code and press ok > enter new code what you want

Jensen VM9512 Factory code is: 012345.

1: Go into AM/FM mode
2: Hit "setup" on the remote control
3: Enter 543210 on the remote, listening for the beep for each number entered
4: A new menu will appear. Touch the button that has the hammer/screwdriver on it in the upper left-hand part of the screen.
5: Select Brake bypass to "ON" and hit the "X" near the bottom of the screen.

the pink wire on the unit is for the E-brake.... ground it out somewhere and that will bypass the brake and fix the problem.

go to language with the control remote, 543210 the rest is your.