Where is water tank? ( bought secondhand). Thank you.

try this link for help getting a manual BERNINA of America

Install a new spark plug and drain the carburetor float bowl. Chances are the bowl has water in it from condensation in the gas tank. Below is a generic diagram.

Hello,

there is no code for free of charge.

Take care,

power supply faulty

Do you have this part to insert the k-cup into? There has to be an exit needle and this part has the exit needle inside of it.

http://iwantsweetdeals.com/Keurig-Breville-Replacement-K-cup-Holder-Assembly-P1208231.aspx

i olso bought myn camera secondhand and no myou do not need a disk for the camera to download picktures to pc
greetings Ruud

you have probably solved this by now but
I just got the same model new
switch on instructions as follows
press and HOLD the POWER button for 3 seconds to switch the unit on
once temperature has been reached, press and HOLD the steam button on top of the iron for up to 20 seconds
this will prime the steam pump and only has to be done once for each ironing session
the pump noise will stop once it has been primed with water
hope this helps if still needed
if you need the user guide, let me know, I'll scan it for you
Wendy

traced the fault to the cold water valve solenoid not operating so pleased to say that the person that sold me the washer has now given me my money back

regards paul