what window start up are you referring to? Do you mean no video showing after power up? Redefine your question.what window start up are you referring to? Do you mean no video showing after power up? Redefine your question.
You can't post conmments that contain an email address.
Re: My lenovo s10e does t display the window start up,it...
If your computer is clearly active when you switch it on, but not displaying anything your ram is probably loose or something, it needs to be looked at by a technician.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Change your screen resolution in the Control Panel. Click Start/Control Panel or Start/Settings/Control Panel then look for Display or Appearance and Personalization. Open the display and change the screen resolution (it might be under the settings tab depending on your operating system).
You can also Right Click on an open area of the Desktop and select Properties to get into the Display.
You can download the drivers from here. Just visit the link and it will direct you to the official download site of Lenovo s10e. Please make sure to download the drivers that matches your operating system. Save the .exe file to your desktop. After downloading, install the driver then restart your computer.
If your are getting Blue Screen error its either you have a faulty RAM or driver conflict going on in your system.I recommend you try to call the Lenovo Support team to diagnose the RAM. Their number is 1 877 453 6686 option 2.Thanks
Try attaching an external monitor to the laptop & see if you could get any display on it. If this is successful, then you might have either a faulty LCD cable or screen inverter board. The
LCD cable transfers data signal from the motherboard & video card
to the LCD screen. It also supplies high voltage DC power to the screen
inverter board. The screen inverter board works as a power supply for
the backlight lamp mounted inside the LCD screen. It converts low
voltage DC power to high voltage AC power needed for the backlight lamp.
hi! just a tip if its a brand new one try to isolate the problem check if it can actually run by removing the battery just by the ac adapter if still doesnt work then probably you have to charge the battery first if it still doesnt charge then probably there is somethin wrong with the power board. i suggest you call your lenovo tech support for further assistance. hope this would help goodluck!
Try to uninstall Lenovo readycomm then restart your computer. Readycomm creates conflict between the windows wireless utility manager resulting to disconnect your wireless connection instantly. You can remove it via the add/remove programs options in the control panel
This is probably a motherboard issue, or drivers - try reformatting the machine (reinstalling windows and drivers) and see how it goes. If this doesnt work, its a hardware issue and the motherboard will need to be replaced.
no, not a problem. go to control panel and click on display.. you need to change your screen resolution to accomodate your printer drivers.. click on settings an select 1024x768 if not high enough go to the next 1 there will be a window that asks do you want to keep click ok or yes for each. until you find the correct resolution.. dont forget to try the printer with each setting you change to. this will take care of your problem...good luck..
what window start up are you referring to? Do you mean no video showing after power up? Redefine your question.
×