Question about Cyberhome CH-DVD 300 DVD Player

2 Answers

My DVD player won't turn on. I tried the remote and also manually. The tray won't open either.

Posted by shonpalace on

  • shonpalace Nov 03, 2009

    Where do I get new capacitors?

×

Ad

2 Answers

Alex Zoubkov

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 405 Answers

Usually, bad capacitors in the power supply are the problem. Most of the time, it is ease to spot them, they are popped on the top. replace all the capacitors that got popped wit the new onece.

Posted on Nov 02, 2009

  • Alex Zoubkov
    Alex Zoubkov Nov 05, 2009

    You can get capacitors from any local electronics repair shop, or parts distributor, as last resort DIGI-KEY or MOUSER (both are on-line parts reseller)

×

Ad

JITENDER KUMAR

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 121 Answers

Youd dvd's capacitors in the power supply are the problem.just spot them, they are popped on the top. replace all the capacitors that got popped wit the new one

Posted on Nov 03, 2009

Ad

5 Related Answers

Anonymous

  • 1 Answer

SOURCE: Conia M580 DVD player has

Easy... follow these instructions

  • unplug from the mains
  • take the cover off (3 screws on back panel, 1 screw each side, sticker on top front)
  • You will see the DVD disk in the player drive
  • Remove the plastic ******** top of the drive - 2 x small phillips screws
  • Lift out the DVD disk.... done.

Posted on Nov 30, 2008

Testimonial: "Many many thanks for your help - your instructions were dead-easy to follow and I've now successfully rescued my much-prized "Black Books" DVD disc!!!"

Anonymous

  • 2 Answers

SOURCE: dvd player wont open

Look on the bottom of your player. Between the two front feet you should see a narrow slot that is about 1 1/2" long (it should say "emergency hole". Shine a light into the slot, you should see a black pin about as big around as a pencil lead. Carefully push this pin in the direction of the arrow. It should release the drawer and allow you to open it.

Posted on Aug 28, 2007

Anonymous

  • 4 Answers

SOURCE: sanyo 6100 dvd player-disc tray automatically opens whenever power is on.

Have you checked to see if it is off track? Sometimes when these machines get bumpbed, dropped, or fall they can jump track. You have to take the cover off and inspect to see if it is off track when it closes and opens. It should go all the way back on the track when it closes. Be careful not to shock yourself. If it is on when you do it and your hand touches the metal parts inside you can get seriously burned or shocked.

Posted on Jan 18, 2007

Anonymous

  • 3 Answers

SOURCE: DVD tray won't open/eject

I had a similar problem, and I took the player apart to find that there was a motor that has a snap-in connection to a circuit board and it was just disconnected. I reconnected it and it worked fine. There are quite a few philips head screws to remove to get into the case. It slides off the back. Once inside, it's very simple looking, it is really un-intimidating. You may have 4 more very small screws to remove directly on top of the DVD tray. If you need to take it off to see under the tray that is. I'd like to guess the problem is that the motor that ejects the tray is disconnected.

Posted on Mar 13, 2007

Anonymous

  • 1 Answer

SOURCE: Locked dvd tray.

Press and Hold EJECT Button, While UNLOCK Is Displayed :-)

Posted on Feb 21, 2008

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Samsung HTC 550 home theatre system. It's set to region one and I've tried everything to make it region free to no avail. I want to watch a region 2 DVD. Can you help??


1. Open tray and remove any disks in tray.
2. Close tray.
3. Switch Off Player and unplug from power. wait 30 seconds (this clears RAM)
4. Reconnect to power.
5. Turn on player with remote.
6. Press ENTER on remote. (ignore message on screen)
7. Press 8, 4, 2, 6, 9 using keys on remote. (if your player is already set to region 2)
8. Press ENTER on remote.
9. Wait until player finishes processing. (approx 15 seconds)
10. Turn off power from remote.
11. Turn power back on with remote.

Player is now Region Free.

or

Turn on with remote control without disc.
When message "No disk" appears, press on the remote,
ENTER,
8,4,2,6,9
ENTER,
If hack work after the second ENTER player will power off automatic.
When power on again this was region free, I can confirm now read region 1, 2 and 4.

Sep 08, 2016 | Samsung HTC-550 DVD Home Theater System

1 Answer

I tried the manual and the remote......still doesn't open


unplugged the unit and then re plugged and turn it on again while pressing the eject button, let see if it does. if still won't open, at this time you are going to remove the cover so you can access the internal part. you need check weather their is an stuck up on the rail motor for the loading tray or the motor belt not aligned.

Nov 09, 2012 | Sanyo DVW-6000 DVD Player/VCR

1 Answer

Sony RDR-GX360 won't respond to any buttons on unit or remote. Only function that works is power button. Disk tray won't even open.


Try unplug,replug the unit back like about an hour later for the unit for resetting itself back to factory setting.If getting the same result the unit might have a shorted motor drive for the disc tray.Or shorted control panel on the unit itself.Well,this thing a basic DVD player only wright?If u can tries take it aparts and check out tries to repair it ur self that great.If u tries the shops,not worth it.Trash it.These basic DVD player only are very cheap now.U can get one brand new like $40 dollars.

Aug 11, 2011 | Sony DVP-S360D DVD Player

1 Answer

Jvc dvd player not playing


Even you don"t have a remote you can play it manually and DVD player play it automatically.Just try this open the tray put the DVD disc on the tray and close it then turn it off for 30 seconds then turns it on then it play automatically if not then there's something wrong to the player.

Hope it may help you:

Regards:
VOTIT

Mar 23, 2009 | Audio Players & Recorders

2 Answers

Sound, but no picture


If you have a progressive scan button on the remote, it might change it back. Try all the video related buttons on the remote with the DVD player on.

Oct 19, 2008 | Cyberhome CH-DVD 300 DVD Player

3 Answers

Locked dvd tray.


with the unit off press and hold the stop button and the eject button.

Jul 08, 2008 | JVC TH-S11 Theater System

2 Answers

Region Settings


Turn Player On
Open The Disk Tray (Leave Open)
On Remote Control Press Stop
On Remote Control Press 1.3.6.9 and 0 (Zero)
Close Disk Tray
Power Off

or

Turn Player On
Open The Disk Tray (Leave Open)
On Remote Control Press Clear
On Remote Control Press 1.3.6.9 and 0 (Zero)
Close Disk Tray
Power Off

Jun 28, 2008 | Disney DTD1363-CAR 13" TV/DVD

1 Answer

How i unlock the codes???


1 - Select DVD mode
2 - Make sure there is no media on the tray
3 - Turn the DVD off using the remote control
4 - Turn the DVD on using the remote control
5 - Press "subtitle" key
6 - Press 7688478 on the remote control
7 - Press and hold 9 on the remote control for some time
8 - Open the tray
9 - Close the tray
10 - The DVD-V4600M is now region-free
If it doen't work at first turn dvd player totally off and try again and hold 9 for longer.

Mar 27, 2008 | Samsung DVD-V4600 DVD Player/VCR

1 Answer

DVD Tray will not open


Uhm..

Unplug it/turn it on and off

Try to press the eject button and lightly pry the tray open with your fingers.

Call support.

Good luck

Dec 21, 2007 | Jwin JD-VD130 DVD Player

Not finding what you are looking for?
Cyberhome CH-DVD 300 DVD Player Logo

Related Topics:

6,659 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cyberhome Televison & Video Experts

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

The Knight
The Knight

Level 3 Expert

76455 Answers

John Porter

Level 2 Expert

96 Answers

Are you a Cyberhome Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...