At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
I have a triangular shaped shadow in the upper right hand corner of the screen. When looking at projector on the inside notice the shape on lens but lens is clean. Could it be the bulb?
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The popping noise is not a good sign. You definitely have a shorted horizontal IC and probably a bad flyback transformer. You will find several bad capacitors that contributed to this problem. The cost of repair will be more than your depreciated TV is worth. Sorry..look for a new one. Thanks for asking and show a few hands of support!
I would check for dust particles before I attempted any type of repair on the unit.
Dust particles will appear as dark spots that are larger than the size of an individual pixel. It must first be determined if the particle(s) are on the LCD panels or the screen.
damm i have the same issue except the left side of the screen is far darker than the right. It still works but is very noticable. If you get this resolved please reply back!
While in playback mode, image is blinking, the word shadow appears in lower right hand corner, use the info button repeatedly until all disappears and image is pure.
Most probably a water mark symbol...kind of thing(bcos of the comment by one guest, stating occurance of the problem commonly), why don't u write to the support for projetcor?
Also, if not within warranty, please do check for any dirt / paper tag / breakage of glass (are u sure they have replaced the unit, during the complaint for trans error)
You may have a dirty or blocked mirror. You can usually take the back off and clean them. If you don't feel confident about it, a repairman can do it for you. If you clean it yourself, I recommend using a good quality glass cleaner and any type of towel that doesn't produce lint. Coffee filters work very well. Don't leave any streaks!
sounds like your main power supplyis going bad . It supose to be 130 dc but I'll bet its down to around 90 to 100 volts!!! its probably the main filter cap or the regulator IC . hard to say without measureing the b+ good luck
×