Question about Kenmore 64902 Electric Dryer

2 Answers

Kenmore Elite Quiet Pak II front-loading dryer does not heat up

What do I need to do to fix this problem? Is it a thermal fuze problem or can it be other things? If other things, please tell me what to look for.

Thanks.

Posted by on

  • Sgt5Rock Jan 03, 2008

    Mr. Gillespie,



    I tried your solution (i.e., check the circuit breaker) and that is not the problem. All breakers are on. They were not flipped. What should I do next?

×

Ad

2 Answers

Yes, I find that 8 out of 10 times it is the thermal fuse. it could also be the heating element.. Take back of dryer cover off.. Fuse is white with two of the same color wires going to it. You can tape wires toghter and then start the machine to see if it heats. There is one more fuse on machine and it is small the size of a dime. DIME size.. not quater size.

Posted on Jan 04, 2008

Ad

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 89 Answers

First, check breaker and make sure your fuses are on... Electric dryers run on 220 volts therefore if one breaker is flipped it will turn but not heat.......... if it doesnt solve problem let me know and i will assist futher

Posted on Jan 03, 2008

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a samsung microwave model # smh1816s working fine all of sudden stop working no power is there a fuze if so where


They do have a fuse. They also have thermal cutoffs and possibly a thermal flame sensor fuse. the main fuse would be near the control panel the thermal flame sensor is usually near the back of the cavity usually on the left side on the outside of the cavity.

Nov 13, 2014 | Microwave Ovens

1 Answer

Lasko outdoor tower fan #4305 no electricity getting to it. Is there a fuze?


There is a thermal fuse on all fan motors. When the motor heats up too much, this thermal fuse blows up. You may replace the thermal fuse or bypass it entirely but you will need to open up the motor, trace the line where the fuse is connected, usually the thermal fuse is connected to the starting capacitor and the main supply line. If you're up to it, please let me know so I can guide you step by step. It's kinda hard to do. Most repair technicians will tell you to just replace the motor.

Jun 27, 2014 | Dryers

1 Answer

I replaced the thermal fuze in my kenmore gas dryer. Now not only does the dryer not FIRE up, but when I push the button to start the dryer, it will not fire and will shut off shortly after. When I let go...


when you start the dryer does the igniter glow red hot? they crack very easy.If you are sure you put the wires on the fuse the right way,and the igniter is glowing, and you remembered to turn the gas back on,( I've done that ), no kinks in the gas line.The next thing I would look at is the gas vavle, or coils. good luck.

Jan 19, 2011 | Kenmore 400 6942 Dryer

1 Answer

Sansa Fuze Music not showing up in the folders


check if you have a virus get firmware updates

Jan 23, 2010 | SanDisk Sansa Fuze MP3 Player

1 Answer

My Sansa Fuze was acting slow and freezing and the radio and voice recorder were the only things that worked.i reset the factory settings and its not acting slow anymore.now it keeps skipping the songs and...


u can download firmware from google it reflash software n'd enjoy !
http://kb.sandisk.com/app/utils/chat/session/L3NpZC9pQjZPbzlNag%3D%3D/sno/0

tell ppl u need re flash it

Nov 04, 2009 | SanDisk Sansa Fuze MP3 Player

1 Answer

Fuze box


inside the fuze box lid are the names.  Or just replace all the blown fuzes

Mar 05, 2009 | 1995 Ford Escort

1 Answer

Dryer wont turn back on.


Hi!! Relax your thermal fuze has shorted out..replace your thermal fuze and all is fine..Good luck..the fuze is located by the motor blower inside the machine its white oval around 2 inches and has 2 wire leads to it good luckk.

Jan 04, 2009 | Kenmore 64992 Electric Dryer

1 Answer

Whirlpool Dryer GEQ9800LW0 won't turn on


Hi!!! it seems that you have a bad thermal fuze located near the blower..change the thermal fuze and you should be okay..Good luck..

Jan 04, 2009 | Whirlpool GEW9200L Electric Dryer

3 Answers

Sandisk sansa fuze in foreign language need to change to english


turn on your sansa fuze then press the menu button then go to the picture of settings then go to the very bottom of the list and press the center button then go down 5 slots and at the very top it should say english and press that one or find someone that speaks the language and have him or her fix it

Dec 25, 2008 | SanDisk Sansa Fuze MP3 Player

Not finding what you are looking for?
Kenmore 64902 Electric Dryer Logo

3,151 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Dryers Experts

Marvin
Marvin

Level 3 Expert

85206 Answers

Ned Halaweh
Ned Halaweh

Level 2 Expert

239 Answers

jimorris77

Level 3 Expert

411 Answers

Are you a Kenmore Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...